Hardware Category - Page 617 of 1133 - CNX Software

April 22, 2018April 22, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

My Experience with Dodocool AC750 WiFi Repeater

A while ago, I tested Dodocool DC30S USB type C Hub with HDMI, USB port, and a card reader, and recently the company asked me whether I wanted to review another of their accessories. My ISP has recently taken the habit of being down several hours each month, so I rely on my neighbor’s WiFi (with he’s permission) in those case, but since the signal is too weak, I’m using a wireless audio streamer and a power bank to extend the signal and connect it to my router using WDS Bridging. Then I saw Dodocool DC24 802.11ac WiFi repeater, so I decided to give it a chance. Dodocool DC24 A750 Repeater Unboxing I received the device is a cardboard box with some specifications. It’s an AC750 router/repeater with 300 Mbps @ 2.4 GHz + 433 Mbps @ 5 GHz. The product page linked above has some more details with the […]

April 20, 2018July 19, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

RAK8211-NB iTracker Battery / Solar Powered Module Comes with NB-IoT & Bluetooth 5 Connectivity, GPS, and 5 Sensors

Rak Wireless has recently launched a new products called RAK8211-NB iTracker based on a Quectel BC95-G NB-IoT module, Nordic Semi nRF52832 Bluetooth 5 chip, and Quectel L70-R GNSS module. The asset tracker module also comes with 5 different sensors to monitor motion and environmental data, and can optionally be powered directly by a solar panel.RAK8211-NB iTracker specifications: Connectivity NB-IoT via Quectel BC95-G (Global) wireless communication module + SIM card socket Bluetooth 5 via Nordic Semi nRF52832 Arm Cortex-M4F micro-controller (Arduino compatible) GPS/GLONASS via Quectel L70 GNSS module Sensors LIS3DH 3-axis “nano” accelerometer LIS2MDL 3-axis digital magnetic sensor. Tilt sensor BME280 pressure, humidity and temperature sensor OPT3001 intensity of light sensor Expansion – 3x headers with SWD, 2x sensor out + tilt out (also usable as GPIO and analog inputs), 3.3V, GND, and reset Power Supply – 3.5V to 18V via solar panel (P2) or battery (P3) Dimensions – 43mm x […]

April 20, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Allwinner VR9 SoC is Specifically Designed for Extended/Virtual Reality Headsets

Virtual reality headsets have been powered by application processors designed for smartphones, tablets, or even TV boxes. For example last year, I reviewed a low cost VR headset good enough to watch 360 / VR videos, but not gaming that was based on Allwinner H8 TV box processor. But we’ve previously seen Allwinner was working on VR9 & VR10 processors specifically designed for virtual reality headsets with launches scheduled for Q4 2016 and Q2 2017. There’s obviously been some delays, but the company also now formally launched Allwinner VR9 quad core Cortex A53 processor specifically designed for XR and VR headset (Extended / Virtual reality). Allwinner VR9 key features & specifications with parts that look specific to XR/VR highlighted in bold: CPU – Quad-Core Arm CortexM-A53 @ 1.8GHz with 32KB L1 I-cache + 32KB L1 D-cache per core, 512KB L2 cache, CoolFlex power management architecture GPU – Arm Mali-T760 @ […]

April 19, 2018April 20, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

AAEON GENE-APL7 3.5″ Intel Apollo Lake Board Features Up to 12 COM Ports and 10 USB Slots

If you have an application requiring a relatively powerful – yet low power – and compact platform, and plenty of USB and/or serial ports (COM ports), AAEON GENE-APL7 might just be ideal. The 3.5″ subcompact board is powered by an Intel Pentium N4200 or Celeron N3350 processor with a SO-DIMM slots, some video/display outputs, two USB 2.0 ports, eight USB 2.0 interfaces, and up to 12 COM ports. AAEON GENE-APL7 board specifications: SoC (one or the other) Intel Pentium N4200 quad core Apollo Lake processor @ with Intel HD Graphics; 6W TDP Intel Celeron N3350 Apollo Lake processor with Intel HD Graphics; 6W TDP System Memory – 1x DDR3L-1866MHz SODIMM up to 8GB Storage – SATA 3.0 interface, 1x mSATA slot (full size) for SSD Video Output / Display I/F VGA, 2-ch 24-bit LVDS1, optional LVDS2/eDP 12V/2A backlight inverter supply Audio – High Definition Audio Interface, optional 2W Amplified Connectivity […]

April 19, 2018April 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Hardkernel Now Offers $48 ODROID-MC1 Solo Board for Clusters

Hardkernel launched ODROID-MC1 (My Cluster One) at the end of last year with four ODROID-XU4S boards powered by Samsung Exynos 5422 processor with Gigabit Ethernet, metal cases, and a cooling fan. As the name implies it is designed for cluster of boards, but the company found out that one size (4 boards) does not fit all, so they are now offered ODROID-MC1 Solo with one ODROID-XU4S board and stackable case to provide more flexibility to their customers. Here’s a reminder of the specifications: SoC – Samsung Exynos 5422 quad core ARM Cortex-A15 @ 2.0GHz quad core ARM Cortex-A7 @ 1.4GHz with Mali-T628 MP6 GPU supporting OpenGL ES 3.0 / 2.0 / 1.1 and OpenCL 1.1 Full profile System Memory – 2GB LPDDR3 RAM PoP Storage – 1x micro SD slot (UHS-1 capable) Network Connectivity – 10/100/1000Mbps Ethernet (via Realtek RTL8153 USB 3.0 to Ethernet bridge) USB – 1x USB 2.0 […]

April 19, 2018April 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Alfawise JD-T8610-Q2 is Both a WiFi Light Bulb and 360° IP Camera

IP cameras and WiFi light bulbs are pretty common nowadays, but Alfawise JD-T8610-W2 combines both in a single device. The 3W white light bulb can be controlled with your Android/iOS smartphone to adjust the light, and a 360° camera with IR night vision is also built into the light bulb. Specifications: Camera + audio 1.3MP fisheye lens camera with 360° field of view (FOV) Built-in microphone and speaker Video / Audio format – H.264/AVI 960×960 @ 20 fps + audio (no format specified) Functions Interphone Motion detection up to 4 meters Night vision via 3 IR LEDs up to 8 meters Real-time video capture and recording Remote control Screenshot Storage – micro SD card slot up to 64GB Connectivity 802.11 b/g/n WiFi with WEP, WPA, WPA2 encryption, 10 meters range Protocols: DHCP, TCP/IP, RTSP Light – 3x 1W white light Power Supply – 110-240V via E27 socket (5V DC internally) […]

April 18, 2018July 24, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

hIoTron Modular & Enterprise IoT Development Kit is Designed for Fast Prototyping

hIoTron modular & enterprise IoT development kit is described by the company has a “fully pre-programmed prototyping kit for quickly building and testing your IoT concept” with plug-n-play module allowing for flexible prototyping. Beside the hardware comprises of a gateway and nodes, the kit also integrates with the company’s enterprise IoT Platform enabling easy design of custom mobile application & GUI dashboard. The company offers standard, advanced, and custom kits, but to keep things simple, let’s focus on the content of their standard kit first: Hi-Gate IoT gateway: WiSoC – Texas Instruments CC3200 Arm Cortex-M4 @ 80 MHz with 1MB flash, 256KB RAM Storage – 1MB serial flash, 512KB EEPROM Connectivity 802.11 n/g/n Wi-Fi, 2G GSM/GPRS (optional 3G/4G), ZigBee, BLE 4.0, sub-1GHz RF/NON RF to REST/MQTT gateway Expansion – 2x GPIO port pins, 2x analog port pins Power Supply – 9-12V DC 3x modular Hi-Nodes (up to 25 supported per […]

April 18, 2018April 20, 2018 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

$38 Nexbox A95X Pro Runs Android TV, Supports Netflix HD

TV box manufacturers should move and more more from Android to Android TV operating systems, so we can expect cheaper TV boxes offering an Android TV experience. One of those device is Nexbox A95X Pro that sells for $37.99 on GeekBuying (pre-orders shipping in about 4 days), and also happens to support Netflix HD (720p). [Update: The promo on GeekBuying appears to be over, but it’s now available on GearBest for $36.99 with coupon GBA95X1] Nexbox A95X Pro TV box specifications: SoC – Amlogic S905W quad core Arm Cortex-A53 processor with Arm Mali-450MP GPU System Memory – 2GB DDR3 Storage – 16GB eMMC flash, micro SD card slot Video Output – HDMI up to 4K @ 30 Hz, AV port (composite) Video – 4K 30 fps H.265, 4K 30 fps VP9 Profile-2, MPEG1/2/4, H.264, HD AVC/VC1, RM/RMVB, Xvid/DivX3/4/5/6, RealVideo8/9/10 Audio Output – Via HDMI and AV ports, coaxial S/PDIF port Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi […]