Hardware Category - Page 496 of 1133 - CNX Software

September 29, 2019September 29, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

TechNexion XORE is a tiny NXP i.MX 8M Mini LGA System-on-Module

There are several ways to design a system-on-module to carrier board interface, and the most common solutions are edge connectors (e.g. SO-DIMM), board-to-board connectors (placed under the module), and castellated holes where the board is soldered directly to the baseboard. Another less common method is to design an LGA (Land Grid Array) module, which also have to be soldered straight unto the carrier board, but enables much more compact system-on-modules, and that’s exacty what TechNexion has done with their XORE family of LGA system-on-module currently powered by the 14-nm NXP i.MX 8M Mini processor. XORE-IMX8M-Mini Module TechNexion XORE module specifications: SoC (one of the other) NXP i.MX8M Mini Solo single Arm Cortex-A53 @ 1.8 GHz + M4 processor, Vivante GC7000Lite 3D GPU NXP i.MX8M Mini Dual 2x Arm Cortex-A53 @ 1.8 GHz + M4 processor, Vivante GC7000Lite 3D GPU NXP i.MX8M Mini Quad 4x Arm Cortex-A53 @ 1.8 GHz + M4 […]

September 28, 2019December 14, 2019 by Ian W MORRISON (Linuxium) - 23 Comments

Beelink J45 Mini PC Review – Windows 10 Works as Expected, but Linux is Unstable

[Update December 14, 2019: We’ve now found out that Ubuntu 18.04 can work fine on Beelink J45, but the Realtek Ethernet driver needs to be manually installed] Beelink has added a new mini PC to their ‘Gemini’ range (X45 and X55) namely the Beelink J45 (aka Beelink Gemini J45). What is rather unusual about the naming of this mini PC is that it uses the slightly older Intel Apollo Lake Pentium J4205 CPU which is a quad-core 4-thread 1.50 GHz processor boosting to 2.60 GHz with Intel’s HD Graphics 505. The J45 is another ‘NUC’ style mini PC and physically consists of a 115 x 102 x 43 mm (4.53 x 4.02 x 1.69 inches) box case with a front panel that includes the power button, a headphone jack and a couple of USB 3.0 ports and then on the rear, two more USB 3.0 ports, two HDMI (1.4)ports up […]

September 27, 2019January 19, 2020 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

NPi i.MX6ULL (Not So) Industrial-grade Linux SBC Starts at $39

[Update: I was initially informed the temperature range of the board was -40°C to +105°C, but Seeed Studio issues a correction explaining the Core module itself is rated -20℃ ~ 80℃ temperature range, and they haven’t tested the breakout board at all so we just don’t know. That means the board is not industrial-grade at all. I’ve left the rest of the post mostly unchanged] We’ve covered several NXP i.MX boards in recent days, but here’s another NXP board courtesy of Seeed Studio with NPi i.MX6ULL industrial-grade Linux SBC powered by a low power NXP i.MX6ULL Arm Cortex A7 processor. The board also comes with 512MB RAM, either an 8GB eMMC flash or 256MB NAND flash for storage, features two Fast Ethernet ports, and various I/Os including two 40-pin GPIO expansion headers. NPi i.MX6ULL board specifications: Core Module SoC – NXP MCIMX6Y2CVM08AB single Cortex-A7 core @ up to 800 MHz […]

September 27, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

MaaXBoard NXP i.MX 8M Raspberry Pi Compatible Board Runs Android 9.0 or Yocto Linux

When we looked for information about PICO-PI-IMX8M single board computer, we noticed another Raspberry Pi shaped board powered by NXP i.MX 8M processor: MaaXBoard by Embest, an AVNET company. The board comes with up to 4 GB DDR4 RAM, a MicroSD card slot or eMMC flash for storage, Gigabit Ethernet, WiFi & Bluetooth, HDMI 2.0, USB 3.0 port, MIPI CSI & DSI ports, and of course a the 40-pin “Raspberry Pi” expansion header. MaaxBoard specifications: SoC – NXP i.MX 8MQ quad-core Arm Cortex-A53 processor, Cortex-M4F real-time core, and Vivante GPU with OpenGL/ES 3.1, OpenGL 3.0, Vulkan, OpenCL 1.2 System Memory – 2GB DDR4 SDRAM (up to 4GB) Storage – MicroSD card slot or optional eMMC flash up to 64GB Video Output – HDMI 2.0 up to 4K @ 60 Hz, MIPI DSI display connector Video Playback – 4Kp60 with High Dynamic Range (H.265, VP9), 4Kp30 (H.264), 1080p60 (MPEG2, MPEG4p2, VC1, […]

September 27, 2019February 16, 2020 by Stephen Vicinanza - No Comments

Blip Nordic nRF52840 Dev Board Includes STM32 Black Magic Probe Programmer & Debugger (Crowdfunding)

The Latest Electronut Labs Nordic nRF52840 Based Dev Board Electronut Labs has started its Crowd Supply campaign for Blip, a Nordic nRF52840 based development board. With many onboard sensors and systems, the boards are aimed at prototyping and projects in a wide variety of BLE and 802.15.4, wireless application scenarios. It has a programmer and debugger built-in. Past Articles Electronut Labs has a series of Nordic Semiconductor SoC projects previously reported on including Papyr, a Bluetooth E-Paper Display and Bluey, a BLE Development board using the Nordic nRF52832, and CNXSoft also published an article comparing several of the Nordic SoC available in development boards for Bluetooth 5 (BLE5). The Features the Stand Out Blip has a Black magic Probe compatible programmer and debugger built-in, along with a temperature/humidity sensor, ambient light intensity sensor, and a three-axis accelerometer. The board is designed to prototype very low power devices and an ability […]

September 26, 2019 by Ayo Ayibiowu - 1 Comment

WandPi 8M SBC Comes Back as PICO-PI-IMX8M with SoM & Raspberry Pi Compatible Baseboard

Back in 2017, WandBoard announced the release of an upcoming Raspberry Pi like SBC based around the NXP i.MX8M Quad applications processor, ARM Cortex-A53 + M4 architecture and Vivante GC7000 GPU called the WandPi 8M. The board was designed around the popular Pi (85 x 56 mm) form factor bringing 4K UltraHD with HDR video quality with pro audio fidelity. WandPi 8M was scheduled for the release in spring of 2018, but ever since WandPi 8M never came to life. It was suggested that the board must have gone to the SBC heaven. Back to 2019, a similar board was discovered recently on Hacker boards called the PICO-PI-IMX8M with almost similar design and specification. The PICO-PI-IMX8M board shown also features the same NXP i.MX8M Quad-core processor and the Vivante GC7000 GPU but relies on PICO-IMX8M system-on-module plus a baseboard inspired by Raspberry Pi form factor, and compatible with (most) HAT […]

September 26, 2019February 16, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

USB Armory Mk II USB Linux Computer Targets Security Applications (Crowdfunding)

Back in 2014, Inverse Path launched USB Armory computer dongle running headless Linux from a MicroSD card and designed for security applications. The company got bought by F-Secure Foundry in 2017, and the latter has now launched another crowdfunding campaign for an upgraded version USB Armory Mk II keeps a similar USB dongle form factor but replaces the NXP i.MX53 Cortex-A8 processor with a more efficiency NXP i.MX 6ULZ Arm Cortex-A7 processor, the USB type-A port with a modern USB-C port, adds 16GB eMMC flash, Bluetooth 5 LE connectivity, and new security features. USB Armory Mk II specifications: SoC – NXP i.MX6ULZ Arm Cortex-A7 @ 900 MHz System Memory – 512 MB DDR3 RAM Storage – 16 GB eMMC flash + external microSD Connectivity – Bluetooth 5 LE + mesh module (U-blox ANNA-B112) with Arm Cortex-M4 MCU (nRF52832) USB – 2x USB type-C ports: 1x DRP (Dual Role Power) receptacle […]

September 26, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

UDOO X86 II SBC Combines Intel Braswell SoC with Microchip ATMega32U4 “Arduino” MCU

UDOO X86 development board was first introduced in a crowdfunding campaign in 2016 with a quad-core Intel Braswell processor coupled with an Arduino 101 compatible Intel Curie module for real-time I/O processing. Early July of next year (2019) the Intel processor and module seems to be going so well and have a bright future together with UDOO X86 board and accessories becoming broadly available. But life can be cruel at times, and Intel announced their plan to discontinue Intel Curie and other IoT projects just a few weeks later with the last shipment scheduled for July 2018. SECO, the company behind UDOO, could only order so much stock of Intel Curie module, so they had to design an alternative, and here we are with UDOO X86 II SBC offering many of the same features but replacing Intel Curie module by a Microchip ATmega32U4 MCU compatible with Arduino Leonardo. Two […]