Hardware Category - Page 16 of 1134 - CNX Software

October 10, 2024October 12, 2024 by Debashis Das - 16 Comments

Qualcomm QCS6490-based Rubik Pi AI SBC supports Android, Linux, and “LU” operating systems

Thundercomm has recently introduced the Rubik Pi AI SBC built around the Qualcomm QCS6490 SoC with a 12.5 TOPS AI accelerator. The SBC comes in a “PI-CO ITX” form factor that combines the Pico-ITX standard and the 40-pin GPIO header found on Raspberry Pi SBCs. The SBC comes with a standard set of interfaces, including USB, HDMI out, MIPI-CSI camera support, Ethernet, Wi-Fi 5, Bluetooth 5.2, and much more. Additionally, the SBC features a 40-pin header for GPIO, UART for debugging, audio output, and RTC battery support. The company mentions that it is the first Pi-based system using Qualcomm’s AI platforms so it supports Raspberry Pi HAT/HAT+ expansion boards, making it suitable for various AI, IoT, and edge computing projects. Rubik Pi AI SBC specification SoC – Qualcomm QCS6490 CPU – Octa-core Kryo 670 with 1x Gold Plus core (Cortex-A78) @ 2.7 GHz, 3x Gold cores (Cortex-A78) @ 2.4 GHz, 4x […]

October 10, 2024 by Debashis Das - 3 Comments

Qualcomm Networking Pro A7 Elite is a WiFi 7 SoC with a 40 TOPS NPU for AI-optimized traffic and range

The Qualcomm Networking Pro A7 Elite platform is a new wireless networking platform that integrates WiFi 7 with edge AI. The wireless networking platform can deliver up to 33 Gbps of throughput and features an AI coprocessor that provides up to 40 TOPS for AI workloads. AI features are designed to enhance Wi-Fi and networking user experience and include Smart Traffic Classifier, Range Boost, and Networking AIOps. The platform also includes 10Gbps Fiber (XGS-PON), Ethernet, front-end modules, and filters into an integrated platform. All these features are designed to streamline system development and reduce design complexity by integrating key elements—from broadband to antenna—into an integrated platform. Qualcomm Networking Pro A7 Elite platform specification Qualcomm’s Wireless Networking Platform CPU – Unnamed quad-core processor, built on a 14 nm node, and clocked at 1.8 GHz NPU – Up to 40 TOPS (AI coprocessor featuring Qualcomm Hexagon NPU) System Memory – DDR3L/DDR4 Storage […]

October 10, 2024October 9, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Intel Processor N50 or N97 touch Panel PCs feature 7-inch or 10-inch TFT color display

Intel N50 or N97 Panel PC 10-inch display

AAEON ACP-2106 and ACP-2076 are two fanless touch panel PCs powered by an Intel N50 or N97 Alder Lake-N processor with respectively 10-inch (1280 x 800) and 7-inch (1024×600) color TFT LCD displays with capacitive multi-touch support. Both models share the same key specifications with support for up to 32GB DDR5 SO-DIMM memory and a mPCIe socket for storage. They feature an HDMI 1.4 for dual display configuration for kiosks or other similar applications, two 2.5GbE ports, M.2 sockets for WiFi and 4G LTE/5G cellular connectivity, and more. AAEON ACP-2106 and ACP-2076 specifications: Alder Lake-N SoC (one or the other) Intel Processor N50 dual-core processor up to 3.4 GHz with 6MB cache, 16EU Intel UHD Graphics; TDP: 6W Intel Processor N97 quad-core processor up to 3.6 GHz with 6MB cache, 24EU Intel UHD Graphics; TDP: 12W Note: Turbo Mode is disabled by default. If enabling it, please ensure the system […]

October 9, 2024October 10, 2024 by Tomisin Olujinmi - 7 Comments

Taoglas AntJack is an RJ45 jack-mounted Wi-Fi antenna for Bluetooth, Wi-Fi 6/6E, and Wi-Fi 7

Dublin-based Taoglas has unveiled the AntJack described as “an industry-first Wi-Fi antenna for an RJ45 Jack”. The AntJack, also known as the FXM100, can be mounted on any standard RJ45 Ethernet connector to create a 2-in-1 solution that saves space and enhances wireless performance across 2.4 GHz, 5.8 GHz, and 7.1 GHz frequency bands. It is a compact (26.6 x 15.6 x 13.1 mm), omnidirectional dipole antenna with support for Bluetooth, Wi-Fi 6/6E, and Wi-Fi 7. It can be used in various applications, such as modems and routers, industrial gateways, factory automation, industrial robotics, and test and measurement systems. The AntJack is especially well-suited for embedded applications with space constraints and positioning challenges such as 4 x 4 or 8 x 8 MIMO configurations. It features an easy “peel and stick” design manufactured from flexible PCB material with adhesive conductive foam, allowing straightforward installation on RJ45 connectors. According to Oliver […]

October 9, 2024October 12, 2024 by Sponsored Post - No Comments

reComputer R1000 Raspberry Pi CM4-powered IoT Gateway runs open-source software for Edge AI applications (Sponsored)

Seeed Studio electrical box architecture

Seeed Studio is a Raspberry Pi-approved reseller and device designer. In May 2024, Seeed released their first edge IoT Raspberry Pi-powered gateway and controller, reComputer R1000. It is Raspberry Pi CM4-powered, with AI capabilities when equipped with Hailo NPU. It comes with all the necessary features that a robust and reliable industrial edge IoT device needs, along with rich and versatile interfaces like three RS485 ports, dual Ethernet, and flexible IoT wireless communication (4G, LoRa, Wi-Fi/BLE, Zigbee) and essential functional modules (GPS, UPS, TPM2.0, PoE, SSD, etc.). With Modbus and BACnet supported, it’s a perfect fit for remote access control, especially BMS, BAS, and iBMS. You’ll find more technical details in our previous article about the reComputer R1025, and on Seeed Studio’s product page where you can also purchase the AIoT gateway. As a powerful edge IoT controller and gateway with AI capabilities, it embraces the Raspberry Pi community, is […]

October 9, 2024October 8, 2024 by Debashis Das - No Comments

GIGAIPC QBiX-ADNAN97-A1 fanless industrial PC features Intel N97 CPU, dual HDMI, dual LAN

GIGAIPC QBiX-ADNAN97-A1 industrial PC is a compact system, powered by the Intel Processor N97 quad-core Alder Lake-N processor. This industrial PC supports up to 16GB of DDR5 memory and features flexible storage options with an M.2 slot for SATA or NVMe drives. Additionally, the QBiX-ADNAN97-A1 supports dual independent displays via two HDMI ports, It also offers dual Gigabit Ethernet, multiple USB 3.2 Gen 2×1 ports, an M.2 E-Key for Wi-Fi/Bluetooth expansion, and a COM port for legacy device connectivity. Designed for reliable operation, this fanless system is ideal for various Industry 4.0 applications, including industrial automation, digital signage, and edge computing. QBiX-ADNAN97-A1 industrial PC specifications SoC – Intel Processor N97 quad-core Alder Lake-N processor @ up to 3.6 GHz with 6MB Cache, Intel UHD Graphics; 12W TDP System Memory – Up to 16GB DDR5 4800 MHz via SODIMM slot Storage – M.2 2280 M-Key socket for NVMe or SATA storage Display 2x HDMI 2.0 […]

October 8, 2024October 10, 2024 by Sponsored Post - 2 Comments

Creality RaptorX is a high-end portable wireless 3D scanner with 41 blue laser lines and NIR scanning (Sponsored)

Creality RaptorX is the world’s first wireless 3D scanner supporting 41 blue laser lines and NIR scanning. The high-end 3D scanner adds WiFi 6 connectivity compared to the earlier Creality CR-Scan Raptor 3D scanner along with much higher accuracy and other features. The new RaptorX 3D scanner features 41 blue laser lines (34 cross laser lines and 7 parallel laser lines) and infrared structure light (NIR). The 34 cross laser lines are used to scan large objects quickly, while the 7 parallel laser lines scan fine details with a resolution down to 0.02mm. The laser also implements a unique face & body algorithm to capture the human body scan more accurately and much faster (as quick as 2 minutes). The RaptorX is capable of scanning tiny objects fitting into a 5mm cube up to larger pieces within a 4000 x 4000 x 4000mm volume. You’ll find other technical details in […]

October 8, 2024October 8, 2024 by Tomisin Olujinmi - No Comments

Infineon EZ-USB FX20 programmable USB controller supports up to 20Gbps speeds, features LVDS interfaces

EZ-USB FX20 programmable controller BGA package

The EZ-USB FX20 is a programmable USB controller supporting speedy transfers via USB 20Gbps and LVDS interfaces. It is the latest addition to Infineon’s EZ-USB line designed to add USB connectivity to devices with high-performance requirements in AI, image processing, and other demanding applications. It offers up to six times the bandwidth of its predecessor, the EZ-USB FX3. The FX20 is powered by a dual-core MCU subsystem, with ARM Cortex-M4F and ARM Cortex-M0+ cores. It features 512KB flash, 128KB SRAM, 128KB ROM, and seven serial communication blocks (SCBs). The cryptography accelerator and high-bandwidth data subsystem enable Direct Memory Access (DMA) data transfers via the supported interfaces. The programmable USB controller includes 1MB of SRAM for USB data buffering. EZ-USB FX20 specifications: CPU – Dual-core, ARM Cortex-M4F core@ 150 MHz, ARM Cortex-M0+ core @ 100 MHz Memory – 512KB flash, 1024 + 128KB SRAM USB – USB 3.2 Gen 2 x2 […]