Hardware Category - Page 1125 of 1128 - CNX Software

November 12, 2010September 9, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Samsung Orion ARM Cortex A9 – Nexus S

Samsung recently showed off its dual-core Cortex-A9 Orion featuring quad-core Mali-400 GPU at Techcron 2010. The Samsung Orion (model name: S5PV310XH) will run at 1GHz (this frequency might be increased later on: I’ve read 1.2 GHz, 1.5GHz or even up to 2 GHz.) and use 45nm lower power manufacturing technology. Samsung already have a BSP using Linaro kernel and the development board having the following characteristics: Samsung Orion SoC Low power audio subsystem Embedded GPS 2D Graphics Acceleration TFT 24-bit true color LCD Controller MALI-400 3D Graphics TV-out and HDMI interface support Multi-format codec up to 1080p @ 30fps The device would runs Android on top of Linaro kernel which takes care of all the low level stuffs. If you are interested in developing for this platform, you can already download and play around with Linaro 10.11 which already supports Cortex A8 and A9 platforms. The Samsung Orion is rumored […]

November 5, 2010November 5, 2010 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Digital Signage Standard: Open Pluggable Specification (OPS)

A while ago, we discussed about Popai Digital Signage Standards, mainly focused on software and client/server interoperability. Intel has just released a new standard for Digital Signage: Open Pluggable Specification (OPS). Here’s the description of the specification on Intel website. The Open Pluggable Specification (OPS) helps standardize the design and development of digital signage devices and pluggable media players. Intel created the OPS to address digital signage market fragmentation and simplify device installation, usage, maintenance and upgrades. The OPS enables digital signage manufacturers to deploy interchangeable systems faster and in higher volumes, while lowering costs for development and implementation. Installing digital signage equipment based on Intel® architecture helps you implement scalable digital signage applications that can network easily with other equipment. This simplifies interoperability and application upgrades designed to meet the digital signage requirements of individual customers, while helping to future-proof technology investments. You’ll need to fill a form to […]

November 3, 2010 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Resources for Qualcomm MSM722x: MSM7225, MSM7227

Qualcomm MSM722x processors – part of MSM (Mobile Station Modem) series – are mainly used in mobile phones and to a lesser extend in tablets such as WellCoM A800. You won’t find any proper documents or information in Qualcomm website (see Qualcomm MSM page) except the following description: Qualcomm’s Mobile Station Modem™ (MSM™) chipset solutions enable cost-effective mobile handsets with advanced capabilities that leverage 3G technology yet minimize development time. Offered on four discrete platforms for tailored functionality, each chipset is integrated with a select set of features from Qualcomm’s multimedia suite of applications to enrich the user experience while maintaining cost-target objectives. So if you plan on developing on that platform, you’ll need to visit Qualcomm developer website to get most of the information you’ll need. There are two chipsets with similar characteristics. MSM7225 The MSM7225 chipset includes a 528 MHz ARM11 processor with a floating point unit (FPU). […]

November 2, 2010October 6, 2019 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

WellcoM WePad A800 Android 2.2 Tablet Video Review

More and more decent (e.g. with capacitive multi-touch screen, decent processor…) and cost-effective android tablets are hitting the market such as Archos Gen8 Series. It might be difficult to obtain Archos 70 in some countries in Asia. But not is all lost as product such as the WellcoM WePad A800 are available in Thailand (and probably other countries). This tablet based on Qualcomm MSM7227 @ 600 Mhz runs on Android 2.2. The device comes with 512 MB DDR RAM, 512 MB Rom, a 7″ multi-touch capacitive touch screen (800 x 480) , Wifi, Bluetooth, 2G/3G network support. I discovered this product in a shop in Chiang Mai yesterday. I tried it a bit, it was very smooth and responsive. It sells for 15900 Baht (530 USD / 383 Euros) with a free bluetooth headset. The following videos (In Thai only) reviews the device. The reviewers runs a lot of benchmark […]

November 1, 2010July 17, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Accurate Time Keeping in Embedded Systems

In many embedded systems, there is a need to keep accurate time/date. This is often performed using an RTC (Real-Time Clock). However, uncalibrated RTC are not that accurate. For example, ST Microelectronics M41T94 RTC datasheet explains that: Uncalibrated clock accuracy will not exceed ±35 ppm (parts per million) oscillator frequency error at 25°C, which equates to about ±1.53 minutes per month. . In order to improve the accuracy, you’ll need to calibrate the crystal for each board at the factory using a frequency counter, that will greatly improve accuracy, for M41T94: When the Calibration circuit is properly employed, accuracy improves to better than ±2 ppm at 25°C. However, calibrating the crystal will further increase the manufacturing costs. Another way to have a very accurate time keeping, is to use the power supply frequency (50 Hz/60 Hz) which is extremely accurate due to interoperability requirements between electricity providers. In the diagram […]

October 30, 2010October 30, 2010 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Archos 101 Archos 70 with Android 2.2

In the previous blog post about Archos 70 Video Review, I mentioned the device was running on Android 2.2. This is not currently accurate, as the device now ships with Android 2.1, but will be upgradable to Android 2.2 soon after. [ad#Google Adsense – Wide Banner] In the meantime, here’s an another Charbax’s video about Archos Gen8 devices (i.e. Archos 28,Archos 32, Archos 43, Archos 70and Archos 101) running a beta version of Android 2.2 for this series of devices. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

October 21, 2010October 29, 2010 by Jean-Luc Aufranc (CNXSoft) - No Comments

Archos 70 Internet Tablet Video Review

Archos as just released a new 7″ Android Tablet. This device costs around 275 USD (249 Euros), which is a pretty good price for a device based on an ARM Cortex A8 at 1 GHz running Android 2.2, a capacitive touch screen (800×480), HDMI output (Up to 720p), built-in wifi (802.11n) and bluetooth 2.1 as well as a front facing camera. Bear in mind that you won’t be able to take pictures or videos with this device since there is no camera on the back of the device. Go to Archos website to get the full technical specs of Archos 70. Here are two videos of the device by Charbax. The first video shows web browser, video playback, google app market place, video playback on TV thru HDMI and facebook. The second video shows the dolphin web browser used with a bluetooth keyboard, video chat with fring (still have some […]

September 21, 2010November 4, 2010 by Jean-Luc Aufranc (CNXSoft) - No Comments

Netgem Set-top-box N5000 – Toshiba Places

Mid-september, Netgem showcased their new set-top box at IBC 2010: the Netbox N5000 Internet/TV Adaptor. A modified version of this Set-top box will be used by Toshiba (Toshiba places) and be available for purchase for 99 Euros starting in October 2010 in France and later in 2011 in some other Europeans countries. [ad#Google Adsense – Wide Banner] First let’s have a look at the casing (Not the one used by Toshiba places). The front panel has the Power LED, a USB port and the remote sensor. They’ll either provide Infrared or RF remotes depending on the end customer requirements. The back of the set-top box features TV In/Out, Digital Audio (S/PDIF) output, HDMI output, an Ethernet port and the power jack (+12V). Their product brief also mentions a USB port on the rear as an option and Wifi support (802.11n). The Netbox N5000 hardware is based on Sigma Designs SMP8655 […]