Hardware Category - Page 1113 of 1132 - CNX Software

March 8, 2012March 8, 2012 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Valueplus Tizzbird Stick N1: Android 4.0 HDMI/USB Media Player Dongle

Valueplus, a Korean company specialized in “media application products”, is currently showcasing the Valueplus Tizzbird N1 at CeBit 2012, in Hanover, Germany on March 6-10 2012. This device is a media player in a small form factor HDMI / USB stick similar to what we have previously seen with the Roku Streaming Stick, Always Innovating HDMI Dongle Media Player and FXI Tech Cotton Candy. The Tizzbird N1 is powered by Telechips 8925 ARM Cortex A5 processor (TCC8925C) clocked at 800 Mhz with 4 GB NAND Flash and runs Android 4.0 (ICS). The device features an HDMI port, a mini USB port for power, a USB port to connect external mass-storage devices such as a USB hard drive, a microSD card slot and an IR sensor. The device also has built-in Wifi 802.11n for network connectivity. The way it works is you plug the stick into the HDMI port of your TV […]

March 6, 2012March 6, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Embedded Systems Outlook and Trends for 2012

National Instruments has recently published a report entitled “Embedded Systems Outlook 2012 – Key Technologies and Methodologies Impacting the Embedded Systems Market” which lists technology and business trends for the development of embedded systems. Here are the key findings: Technologies & Architectures: Embedded Platforms Technology providers are developing components, modules, or even complete embedded platforms (software + hardware) with higher levels of integration and increased functionality to speed up time to market. System-on-Chip (SoC) and System-on-Module (SoM) benefit from this trend and some also embed a FPGA. Reconfigurable Computing Previously, designers chose between low-cost microcontroller or high performance CPU based on the expected performance needs of the embedded system. As cost decreases and performance increases, low cost devices such as control and monitoring systems now often come with more features thanks to the use of programmable logic. This type of flexibility can be achieved by adding an FPGA to the MCU […]

March 3, 2012March 3, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Digi International Unveils Embedded Application Development Kit for Android

Digi International has released its Application Development Kit for Android (the world first Android embedded application devkit according to the company) at Embedded World 2012. This Development Kit is comprised of both software and hardware components. The software development kit (SDK) includes drivers and Digi software extensions to create Android-based applications on embedded platforms while eliminating tedious driver development work. The kit also includes one of 2 Digi Wireless modules based Freescale i.MX51 (ConnectCore Wi-i.MX51) and i.MX53 (ConnectCore for Wi-i.MX53). The complete Digi Android development kit includes: Quick start guide Digi Application Development Kit for Android CD/DVD Documentation and development board schematics ConnectCore Wi-i.MX53 module – 1 GHz Freescale i.MX53, 512 MB NAND Flash, 512 MB DDR2, -20 to +70° C. 7″ WVGA LCD panel with touchscreen Digi JumpStart Kit development board: 3 serial ports (1 x RS-232/422/485, 1 x RS-232 Tx/Rx, 1 x TTL) VGA and HDMI 1.3 video outputs […]

February 29, 2012February 29, 2012 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Boundary Devices Unveils Nitrogen6X Freescale i.MX6 Development Kit (aka i.MX6q Sabre Lite)

Arrow Electronics and Boundary Devices have launched the Nitrogen6X, a low cost development kit based on Freescale i.MX6 quad-core cortex A9 processor. Here are the technical specifications of the Nitrogen6X board: Quad-Core ARM Cortex A9 processor at 1GHz (i.mx6Quad) 1 GB of 64-bit wide DDR3 @ 532MHz Board Dimensions: 4.5″ x 3″ 2MB Serial Flash Three display ports (PRGB, LVDS, HDMI) Parallel camera port with OV5642 Interface Multi-stream-capable HD video engine delivering 1080p60 decode, 1080p30 encode and 3-D video playback in HD Superior 3-D graphics performance with quad shaders for up to 200 Mt/s Separate 2-D and/or Vertex acceleration engines for an optimal user interface experience Serial ATA (SATA) Dual SDHC card slots PCI express port Analog (headphone/mic) Audio 10/100/1G Ethernet with Power over Ethernet support 2 RS-232 Serial ports 10-pin JTAG interface I2C/GPIO/SPI 3 High speed USB ports (2xHost, 1xOTG) CAN port TiWi 802.11 b/g/n WiFi+BT optional Supports Android […]

February 28, 2012July 17, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Embedded Artists and NXP Release The First ARM Cortex-M Android Open Accessory Development Kit

Embedded Artists and NXP introduced the TN-20764, a board that can be used with Android Open Accessory Application (AOAA) development kit that features 2 NXP Cortex-M MCUs, at Embedded World 2012. The board includes Ethernet, CAN and IEEE 802.15.4 interfaces as well as a remote CAN node, enabling designers to develop accessories for consumer applications, as well as home, building and industrial automation applications requiring different types of connectivity. There are already Arduino and PIC-based Android Open Accessories, but this board is the first AOAA kit based on ARM Cortex-M micro-controllers. As mentioned above, the board features 2 Cortex M micro-controllers: The NXP LPC1769, a 120-MHz Cortex-M3 based MCU, provides the interface to the Android mobile device via its full-speed USB transceiver . The LPC1769 also includes 512 KB flash and 64 KB on-chip SRAM, an Ethernet MAC, a CAN 2.0B controller, an 8-channel, a 12-bit ADC, a 10-bit DAC, […]

February 28, 2012February 28, 2012 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Play Angry Birds For Real with Mbed NXP Cortex-M0 Slingshot

If you’re just bored to play Angry Birds with the touchscreen of your smartphone or with your mouse in Angry Birds for Chrome, you can now bring the fun back to the game by playing with a real slingshot ! mbed designed a USB slingshot with an mbed NXP LPC11U24 (Cortex-M0 MCU) board that emulates a USB mouse. mbed measures the angle and strength applied with: An accelerometer that measure the tilt by tracking the gravity vector A rubber stretch sensor used as the sling, and measure how much it is stretched. They built the slingshot with the following hardware components: mbed NXP LPC11U24 board – 59 USD 3-axis Accelerometer – ADXL345 Accelerometer connect via SPI – 14.95 USD Stretch Sensor connected to pin 15 (analog input) – 9.95 USD USB B connector Handcrafted Slingshot Here’s how mbed describes their NXP board: The mbed NXP LPC11U24 MCU module is a […]

February 27, 2012 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

HiSilicon Unveils Quad-Core Cortex A9 K3V2 Processor (Hi3620)

HiSilicon, a subsidiary of Huawei, has unveiled the K3V2 quad-core cortex A9 processor at mobile world congress 2012, Barcelona. The processor comes in two version 1.2 and 1.5 GHz and the company claims the chip delivers 30 to 50 percent more performance than existing quad-core processor including the NVidia Tegra3. This performance boost is apparently possible thanks to a 64-bit memory bus as well as a powerful 16-core GPU (by an unnamed US chip designer) that is at least twice as fast as the competition. The current versions of the chip are manufacturer using TSMC 40 nm low power process, but the company plans to move to 28-nm technology for further power efficiency later this year. They do not use a companion core like the NVidia Tegra 3 to save power, but instead HiSilicon designed an A.I.PS (Artificial Intelligence Power Scaling) Core in K3V2, which can manage cores CPU and […]

February 24, 2012June 4, 2013 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Low Cost Freescale iMX6 Quad Sabre Lite Development Board

i.MX6q SABRE Lite Board is a low-cost development platform based on Freescale Quad Core Cortex A9 i.MX 6Quad Application Processor. This will probably be the first low cost ARM quad-core development board to hit the market. Nvidia has previously announced the CARMA Tegra 3 CUDA Development Kit, but the price has not been announced and when I look at the picture of the board and the specs, “low cost” does not come to mind. Here are the technical specifications for the Sabre Lite board: Quad-Core ARM® Cortex A9 processor at 1GHz per core 1GB DDR3 @ 532MHz 3 display ports (RGB, LVDS, and HDMI 1.4a) Two camera ports (1xParallel, 1x MIPI CSI-2) Multi-stream-capable HD video engine delivering H.264 1080p60 decode,1080p30 encode and 3-D video playback in HD Triple Play Graphics system consisting of a Quad-shader 3D unit, and a separate 2-D and separate OpenVG Vertex acceleration engine for superior 3D, […]