Hardware Category - Page 1043 of 1132 - CNX Software

August 27, 2013November 19, 2022 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

$49 (and up) Hex is an Arduino-compatible, Soon-to-be Open Source Nanocopter Kit

Do you remember Mecam, an upcoming $49 nanocopter with a camera? AFAIK, it’s not there yet, but a similar product with a similar price point is now “available” on Kickstarter. Hex nanocopters (quadcopter and hexacopter versions) are not voice-controlled, and do not come with a camera by default, but you can control them with iOS or Android mobile devices, and a camera can be fitted if needed. It comes as a kit, so you’ll have to assemble it yourself, and since it’s fully open source, you could even customize it to your taste. Hex specifications: Propellers – Size: 56×8.5 mm, Fits shaft: 1.0 mm Motors – Diameter: 7.0 mm, Length: 20 mm, Shaft diameter: 1.0 mm, Over 50,000 rotations per minute (rpm) Flight Control System: Flight control – Microwii Copter Processor – Atmel ATMega32u4 Gyro and Accel – InvenSense MPU6050 (6-axis) Battery – 350mAh battery (Flight Time – 7 minutes) […]

August 26, 2013August 26, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Migoal TransMaker TR10 and TR11 Transform Your Samsung Galaxy S3 / S4 into a 10.1″ or 11.6″ Tablet or Laptop

If you’ve got an Samsung Galaxy S3 or S4 smartphone, and sometimes, you’d like to use it with a larger screen and a keyboard, there’s now a solution with Migoal TransMaker. The device does something similar to Motorola Lapdock, but it can support both tablet and laptop modes thanks to a detachable keyboard dock. You can use it by sliding your phone at the back of the tablet screen. TransMaker TR10 and TR11 specifications (Tablet): Display: TR10 – 10.1″ IPS touchscreen panel (1280×800 resolution) TR11 – 11.6″ IPS touchscreen panel (1920×1080 resolution) Audio – 1x2W Speaker + 3.5mm earphone jack USB – 1x micro USB port Buttons – Home, menu, back, power on/off, volume +/- Power: 1x DC-in 5000mAh Lithium battery Dimensions TR10 – 263 x 181 x 10.7mm TR11 – 305 x 192 x 11.5mm Net weight – TR10: 525g, TR11: 620g TransMaker TR10 and TR11 specifications (Keyboard dock): […]

August 25, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

MK823 Android Set-Top Box Features AllWinner A31s SoC

AllWinner A31s is a cost down version of AllWinner A31 quad core Cortex A7 processor that is designed for phablets, with support for lower LCD and camera resolutions. This means A31s may actually be better choice than A31 for media players since few make use of LCD and/or camera interfaces. MK823 is the first media player I’ve heard of that use A31s processor. Here are the specifications of the device: SoC- Allwinner A31S quad-core Cortex A7 @ 1.0 GHz with PowerVR SGX544 MP2 GPU System Memory – 1GB DDR3 Storage – 8GB NAND Flash + SD card slot (up to 32GB) Video Output – HDMI 1.4 Connectivity: 10/100M Ethernet 802.11 b/g/n Wi-Fi Bluetooth 4.0 USB – 3x USB 2.0 Host port (including one OTG) Power Supply – 5V/2A Dimensions – N/A Weight – N/A This 4.2.2 Android TB box comes with a 5V/2A power adapter, an HDMI cable, a USB […]

August 24, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Habey EMB-3700 Embedded Board Features AMD G-Series SoC

AMD recently announced their G-Series SoC family that combines a CPU, a GPU, and a controller hub into a single chip, as ARM has been doing for a while, and more products based on the platform are entering the marketplace. I’ve already written about Win Enterprises MB-60830 and Netboard A10 single board computers, and today I’ll introduce another option with Habey EMB-3700, a 3.5″ embedded board that targets applications such as digital signage, point-of-sale (PoS), industrial automation, machine to machine, in-vehicle telemetry, and medical technology. Habey EMB-3700 Specifications: SoC: GX-420CA quad core @ 2.0GHz (25W TDP) with Radeon HD8400E or GX-415GA quad core @ 1.5GHz (15W TDP) with Radeon HD8330E or GX-210HA dual core @ 1.0GHz (9W TDP) with Radeon HD810E System Memory – 1x 204-Pin DDR3 SODIMM, up to 4GB (ECC) RAM Storage – 2x 6Gb/s SATA 3.0 connectors Video Output: HDMI up to 1920 x 1200 VGA up […]

August 23, 2013August 23, 2013 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Sky Drone FPV HD Video Solution For Drones Uses 3G or 4G/LTE Networks and the BeagleBone Black

Earlier this week, I wrote about SparqEE CELLv1.0 a low cost cellular module to allow applications such as RC helicopter with extended range thanks to cellular networks. It turns out there’s currently a crowdfunding campaign that aims to bring such solution to market, but using 3G/4G USB dongles instead. Sky Drone FPV (First Person View) is an HD video system that can be controlled using 3G or 4G/LTE networks, and features the BeagleBone Black as the controller board. It would usually be attached to a quadcopter, by there’s not reason why you could not also use it with RC ground vehicles. Let’s start with the technical specifications: Controller Board – BeagleBone Black 3G/4G LTE Modem: Option 1 – Huawei E397Bu-501 for US / Americas (4G LTE FDD 1700/2100MHz and 700MHz) Option 2 – Huawei E398u-1 for Europe / Asia (4G LTE FDD 900/2600 MHz) Camera: Option 1 – Full HD […]

August 22, 2013June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

$59 Iteaduino Plus ARM Linux Board Features Raspberry Pi and Arduino Compatible Headers

Iteaduino Plus is a development platform designed by ITEAD studio, a Shenzhen based company, powered by AllWinner A10 with 1GB RAM, a micro SD card slot, expansion header, etc… Overall features are very similar to the Cubieboard, but the platform is comprised of a baseboard and a CPU module. The baseboard features a 26-pin GPIO header compatible with the one on the Raspberry Pi, and you can add an expansion board to connect Arduino Shields. Iteaduino Plus specifications: SoC – AllWinner A10 Cortex A8 @ 1GHz with Mali400 GPU System Memory – 1GB DDR3 @480MHz Storage – 1x micro SD slot, 1x SATA Video Output – HDMI Connectivity – 10/100M Ethernet USB – 2x USB Host, 1x USB OTG Audio – 3.5mm Audio in and out jacks Expansion headers (see pin assignment) 2x 2×36-pin (Total 144, but not all used) – I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, […]

August 21, 2013August 21, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Making-of Video for the MinnowBoard

A second, and last, fun video for today. After uploading a making of video for the Beaglebone Black, CircuitCo has done it again, but this time with the MinnowBoard, an Intel Atom embedded board, and uploaded a video showing how the board is manufactured in their factory in Dallas, Texas. The main steps are very similar to the one performed by the Beaglebone Black, but they apparently skipped a few steps in the video: A machine applies solder paste to the PCB, and inspects the solder paste. Two SMT machine mount up to 33,400 chips per hour. The Intel Atom processor is placed on the board by another machine Reflow soldering for SMT components Optical inspection via an automatic optical inspection (AOI) machine (Model AV 862) Functional testing Packing Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, […]

August 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

KVM on 64-Bit ARM with AppliedMicro X-Gene Developement Platform

Applied Micro announced X-Gene 64-Bit ARMv8 Server-on-Chip at ARM Techcon 2011, and later in 2012, they showcased Apache2 on an FPGA implementation of the chip. More recently, they showcased KVM (Kernel-based Virtual Machine) on their X-C1 hardware platform with an actual X-Gene SoC at Linaro Connect Europe 2013, and Linaro has just uploaded the video of the demo. The development board features 8 ARMv8 64-bit processors, PCI network, up to 6 SATA drives (but only one used in the demo), and they also have hardware fitted into a 1U rack. The demo below runs 4 SMP Linux virtual machines (with 2 VCPUs), including 2 ARMv7 32-bit, and 2 ARMv8 64-bit guests, running web servers concurrently on each VM using VirtIO-based network virtualization. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and […]