Hardware Category - Page 1009 of 1132 - CNX Software

April 11, 2014May 28, 2014 by Jean-Luc Aufranc (CNXSoft) - 31 Comments

Ugoos UT3 Rockchip RK3288 based Android TV Box (Board Pictures and Specs)

We’ve already seen RK3288 based Android TV boxes and sticks started to be advertised on Alibaba, and today Ugoos contacted me and shared some pictures and specs of their PCBA for Ugoos UT3 Android 4.4 TV box based on Rockchip RK3288 quad core Cortex A17 + Mali-T764 GPU SoC. Here are the specs of the board and product: SoC – Rockchip RK3288 quad core CortexA17 @ 1.8GHz + Mali-T764 GPU with support for OpenGL ES 1.1/2.0 /3.0, and OpenCL 1.1 System Memory – 2GB DDR3 (Option: 4GB) Storage – 8GB NAND Flash (Options: 16, 32 or 64GB) + micro SD card slot (up to 32 GB) Connectivity – 100M/1000M Ethernet, dual band WiFi 802.11 b/g/n (2.4GHz/5GHz) and 802.11 a/c using external Wi-Fi antenna, Bluetooth 4.0 (option?) Video I/F HDMI 1.4a output (female) up to 4k2k @ 30 fps, 1080p60 AV output (3.5mm jack) HDMI input (female) up to 1080p Audio I/F […]

April 10, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Samsung Gear 2 Smartwatches are Powered by Exynos 3250 SoC

When Samsung announced their Gear 2 and Gear 2 Neo smartwatches running Tizen, they only vaguely mentioned a dual core processor running at 1 GHz powered the devices. SamMobile reports the two watches should be powered by a new processor called Exynos 3250 with two cores and clocked at 1 GHz as initially announced. Ifixit also made a tear down of the Gear 2 watch, and at first, it seems Exynos 3250 is nowhere to be seen, but it turns out it’s probably combined with a DRAM (and Flash?) package named KMF5X0005M, and shown inside a red square in the picture above. Samsung Galaxy Gear, the company’s first smartwatch, was a modified version of Exynos 4212 dual core processor, but using only one core and downclocked to 800 MHz. SamMobile thinks the Gear 2 can use a dual core processor @ 1 GHz, due to battery life gains achieved by […]

April 9, 2014 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Tronsmart Vega S89 (Elite) Android 4.4 Media Player Unboxing

Last review, I wrote an unboxing post about M8, an Android TV Box powered by Amlogic S802 quad core Cortex A9r4 processor with a Mali-450MP6 GPU. I’m still waiting for the firmware to test this device. In the meantime, Geekbuying sent me Tronsmart Vega S89 (Click for full specs), another Android Kitkat TV box powered by S802. There are actually two versions: Tronsmart Vega S89 (16 GB Flash, dual band Wi-Fi), and Tronsmart Vega S89 Elite (8GB Flash, 2.4 GHz Wi-Fi) which is the model I received. I’ll write an unboxing post today with the device and the board, and test the firmware in the next few days. Tronsmart Vega S89 (Elite) Unboxing Geekbuying sent me the sample via DHL which I received in the package below. There are quite a few accessories included with the board. From left to right: IR remote control (2x AAA batteries not included), HDMI […]

April 9, 2014 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Rockchip RK3288 based Android Mini PCs and TV Boxes Are Starting to Show Up (Wholesale)

Rockchip RK3288 based devices should be available soon. At the end of last month, I read Pipo was about to introduce RK3288 Tablets at the Hong Kong electronics fair this month, and yesterday I’ve been informed some RK3288 mini PCs and TV Boxes had started to appear on Alibaba. RK3288 HDMI TV Dongle (D368) D368 mini PC is said to come with the following specs according to a product page on Alibaba: SoC – Rockchip RK3288 quad core ARM Cortex-A17 with Mali-T7xx 3D GPU (OpenGL ES 1.1/2.0 /3.0,and OpenCL 1.1) System Memory – 2GB DDR3 (Optional:1GB) Storage – 8GB NAND Flash (Options: 4GB and 16GB), micro SD card (up to 32GB) Video & Audio Output – HDMI 1.4a (Resolution 4K and 1080p60 support) Connectivity – Dual band Wi-Fi 802.11 b/g/n and 802.11ac, optional Bluetooth 4.0. Video Codecs Decode – H.265, MPEG-1, MPEG-2, MPEG-4,H.263, H.264, AVS, VC-1, RV, VP6/VP8, Sorenson Spark, MVC […]

April 9, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

$249 Nitrogen6 MAX Development Board Features Freescale i.MX6 Quad, 4GB RAM, mPCIe Connector, and More

There are now many low cost development boards based on Freescale i.MX6 ARM Cortex A9 processors with Wandboard, Sabre Lite, UDOO, Nitrogen6X among others, all selling for less than $200. Boundary devices, the company behind Nitrogen6X board, has made a new version called Nitrogen6 MAX that maxes out the RAM to 4GB, adds a full mPCIE slot, a dual channel LVDS connector, and 4GB on-board eMMC. Nitrogen6 MAX specifications: SoC – Freescale i.MX 6Q quad core ARM Cortex A9 processor at 1GHz with Vivante GC2000 3D GPU System Memory – 4GB 64-bit DDR3 @ 532MHz Storage – 4GB eMMC, SATA connector, two micro SDHC card slots, 2MB Serial Flash Connectivity – 10/100/1G Ethernet, TiWi 802.11 b/g/n WiFi + Bluetooth BLE module Display Output – HDMI, 2x LVDS, Parallell RGB Audio I/O – HDMI, Analog (headphone/mic) audio and 2W amplified audio Camera I/F – Parallel camera port with OV5642 Interface, MIPI […]

April 9, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Raspberry Pi Compute Module is a $30 Raspberry Pi Compatible System-on-Module

Albeit the initial goal of the Raspberry Pi board was to address computer science education, it has become extremely popular with hobbyists, has made its way in many different kinds of hardware, and is now clearly the number 1 low cost ARM Linux development board. The Raspberry Pi foundation has then decided to design and sell a system-on-module called Raspberry Pi Compute that people can use in actual products. Since the module will be mostly software compatible with the original Raspberry Pi board, the specs are similar: SoC – Broadcom BCM2835 ARM 11 processor @ 700 MHz with Videocore IV GPU System Memory – 512MB RAM Storage – 4GB eMMC Flash SoM Connector – DDR2 200-pins SODIMM Dimensions – 67.6x30mm board which fits into a standard DDR2 SODIMM connector The main difference is they’ve replaced the SD card slot found in the board, by an eMMC module which is more […]

April 8, 2014April 8, 2014 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

PIPO X1 (Beta) Android TV Dongle Powered by Rockchip RK3188 Sells for $40

PIPO X1 is an HDMI TV Stick running Android 4.2 with more or less the same specs (2GB RAM, 8 GB Flash) as many other competiting products, but with a price much lower at $39.99 including shipping. The company however mentions the product is still in beta version, which may explain why it’s so cheap… Let’s have a look anyway. Pipo X1 specifications: SoC – Rockchip RK3188 quad core Cortex A9 @ 1.6GHz + Mali 400MP4 GPU System Memory – 2GB DDR3 Storage – 8GB + micro SD slot (up to 32GB) Video & Audio Output – HDMI Connectivity – Buil-int 802.11b/g/n Wi-Fi and Bluetooth 4.0 USB – USB 2.0 host + micro USB (for power) Dimensions – 100 x 40 x 8mm Weight – 30g The device ships with a micro USB cable. That means you’ll need to provide your own 5V/2A power adapter. The company also highlights […]

April 8, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Microsoft Announces Intel Shark Cove Windows Development Board

There are now plenty of affordable ARM based Android and Linux development board which you can use to develop apps that access hardware drivers, and a few Intel based ones have also started to pop-up such as Galileo and Minnowboard MAX. The problem, for Microsoft, is that none of them currently support Windows. You could always use a PC to develop Windows apps, but this may become a problem once you start dealing with embedded devices and want to access undiscoverable buses such as GPIOs, serial interfaces and so on, as PCs are also protected by secure boot which limits developing and testing third-party drivers. So Microsoft has decided to join the affordable development boards bandwagon, starting with Intel Shark Cove development board for Windows developers. There are very few technical details about the board, but we do know it will based on an Intel Atom processor, and provide access […]