Hardware Category - Page 1008 of 1133 - CNX Software

April 19, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Asus C200 & C300 Chromebooks Feature Intel N2830 “Bay Trail-M” SoCs

Asus is about to launch two ChomeBooks, Asus C200 Chromebook and C300 Chromebook, for respectively around $250 and $350 according to listing from various online retailers, as NetbookItalia has recently reported. Let’s go through the specs available for both laptops. These are unconfirmed and incomplete, as I just gathered some information from multiple sites. Asus C200 Chromebook: SoC – Intel Celeron N2830 dual core processor @ 2.16 Ghz (Burst mode: 2.41 GHz ) with Intel HD graphics up to 750 MHz. (7.5 W TDP). System Memory – 2GB RAM Storage – 16 GB eMMC Display – 11.6″ display (1366×768) Connectivity – Wi-Fi 802.11n, Bluetooth 4.0 USB – 1x USB 2.0 port, 1x USB 3.0 port Video Output – HDMI port Webcam – HD Battery – 48WHrs, 3S1P, 3-cell Li-ion Polymer Battery Pack up to 10 hours Weight – 1.15kg There appears to be at least three variants, namely C200MA-EDU, C200MA-DS01 and […]

April 18, 2014April 18, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

BeagleBone Black Gets 4GB Flash, a Price Increase, and Better Availability

The BeagleBone Black has been launched about a year ago, and this low cost ARM Linux board has become pretty popular with hobbyists, robotics courses at universities, and even people making products. The downside is that it has been difficult for CircuitCo, the manufacturer, to keep producing enough boards to match the demand while keeping the price at a low $45 with very little margin, and there are currently about 150,000 boards on distributor back-orders. To improve availability, Beagleboard.org has announced Revision C of the BeagleBone Black with a 4 GB eMMC, which may be easier to source over time than the original 2 GB eMMC, and that will sell for about $5 to $15 more than the previous version, or between $50 and $60. The rest of the hardware specifications remain identical. There’s also a change on the software side, as the board will be pre-loaded with Debian, instead […]

April 18, 2014April 18, 2014 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Intel Announces its First “Bay Trail” Fanless NUC Kit

Intel already announced a Bay Trail NUC selling for $140 earlier this year, but despite the low power dissipation (7.5W TDP) of the Intel N2820 processor, it requires a fan for cooling. The company has now unveiled its first fanless mini PC with Intel NUC Kit DE3815TYKHE powered by Intel Atom E3815 Bay Trail-I processor with 5W TDP. This NUC is destined for industrial and enterprise solutions such as digital signage, point-of-sales, kiosks, and thin clients. Here are the specs of this tiny x86 computer: SoC – Intel Atom E3815 single core processor @ 1.46GHz single core with 512KB cache and 5W TDP, coupled with Intel HD Graphics up to 400 MHz. System Memory – Up 8 GB 1.35V, 1333/1600 MHz (down clocked to 1066 MHz) DDR3L SO-DIMM Storage – 4-GB eMMC, support for one internal 2.5″ SATA HDD or SDD (up to 9.5mm thick) Video Output: 1x HDMI 1.4a 1x […]

April 17, 2014August 17, 2014 by Jean-Luc Aufranc (CNXSoft) - 242 Comments

Review of M8 Android Kitkat TV Box Powered by Amlogic S802 SoC

A few days ago, I wrote an Unboxing and Specs post about the M8, an Android TV Box powered by Amlogic S802 quad core Cortex A9 processor. The review took a little as I was waiting for a new firmware. I’ve now upgraded this S802 Box, and been able to complete a review. As usual , I’ll start by giving my first impressions, have a look at the user interface and settings, test different king of video files, evaluate Wi-Fi performance, and try to cover most hardware features including Bluetooth, external storage, USB webcam, and so on. The overall user’s experience, is very similar to Tronsmart Vega S89, but there are some notable differences I’ll go through during the review. First Boot, Settings and First Impressions Shenzhen Tomato sent me a sample unit which they call TM8 (Tomato M8?), but I’ll just refer to the device as M8 in the […]

April 16, 2014November 23, 2014 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Atmel SAMA5D3 Xplained Board Unboxing and Quick Start Guide

Atmel SAMA5D3 Xplained is an evaluation board running Linux powered by SAMA5D36 ARM Cortex A5 micro-processor with 256 MB DDR2, 256 MB flash, two Ethernet ports, 3 USB connectors, and more. This embedded board targets industrial automation, networks, robotics, control panels and wearable applications. The only video output is an LCD connector so it is reserved for headless or flat panel based applications. You can check full specs on my Atmel SAMA5D3 Xplained announcement post. The company kindly sent me a sample, so that I can share my experience with the board. I’ll first post some unboxing pictures, show how to get started with the pre-installed image, and build my own Linux image. The board can be purchased for $79 from Atmel e-Store, as well as several distributors (P/N: ATSAMA5D3-XPLD). Atmel SAMA5D3 Xplained Unboxing I’ve been sent the board via DHL in the following package, which gives a short desscription […]

April 15, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

$14 Digispark Pro is a Tiny Arduino Ready Board Supporting over 25 Shields (Crowdfunding)

Digispark Pro is yet another small Arduino compatible board, but it costs only $14, and over 25 small form factor shields for Wi-Fi, BLE, mesh networking, etc.. are available for the platform. Let’s get straight into the hardware specs: MCU – AVR MCU @ 16 Mhz with 16KB Flash Memory (14.5K+ after bootloader) I/Os 14 I/O pins (2 shared with USB) I2C, true SPI, UART, LIN, and USI ADC on 10 pins 3 PWM Channels (which can be assigned to a selection of pins) USB – Micro USB for debugging, communication and power Misc – One button usable as reset, program, or user button, Power and Test/Status LEDs, user accessible solder jumpers to disable LEDs, and other features for lower power consumption Power – 5V via micro USB, or External Source – 5v or 6-16v (automatic selection). On-board 500ma 5V regulator Dimensions – 26.7mm x 18.3mm The board is compatible […]

April 14, 2014 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Rockchip RK3288 based Android and Chromium OS Tablets and TV Boxes (Video)

After the first RK3288 Android TV boxes started to be promoted on Alibaba, and the first RK3288 board was shown, Rockchip is currently showing their quad core Cortex A17 processor in reference designs, tablets, and TV boxes running Android or Chromium OS at the Hong Kong Electronics Fair. Charbax interviewed the company, and the first demo was a development board connected to an LCD display running Chromium OS, which is said to handle 30 tabs without issues. Rockchip RK3288 is now advertised as being a quad core Cortex A17 with a Mali-T764 GPU, but when Rockchip representative was asked, he strangely denied to comment on whether it was a Cortex A12 or A17, as both are very similar. He also said the GPU was a Mali-T760MP4… If this seems all confusing that’s because it is… Some interesting things are H.265/HEVC support for 4K2K videos, and HDMI 2.0 for 4K @ […]

April 13, 2014April 13, 2014 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

MINIX Unveils NEO X8 and X8s Android TV Boxes Powered by Amlogic S802 & S802-H SoCs

MINIX has been providing Rockchip based Android TV boxes for a couple of years notably with their NEO X5 and NEO X7. They will now also offer devices powered by Amlogic with NEO X8 and NEO X8s respectively powered by S802 and S802-H quad core SoC. The advantage of the former is that it fully supports DTS and Dolby decoding and pass-through. Let go through the hardware specs of both devices: SoC NEO X8 – Amlogic S802 quad core cortex A9r4 @ 2 GHz with Mali-450MP6 GPU NEO X8s – Amlogic S802-H quad core cortex A9r4 @ 2 GHz with Mali-450MP6 GPU including Dolby and DTS support. System Memory – 2GB DDR3 Storage – 8GB (X8) / 16GB (X8s) eMMC + SD/MMC card reader Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi, dual band support for X8s, Bluetooth 4.0 Video Output – HDMI 1.4b up to 4K @ 30 fps, with […]