Hardware Category - Page 1000 of 1116 - CNX Software

February 26, 2014 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Seiki Digital 4K TVs Sell for as Low as $500

A couple of month ago, I bought a 39″ Full HD Panasonic TV that I’m currently using as my computer screen for about $400. But this morning, I’ve found out you can now buy Seiki Digital SE39UY04 39″ 4K TV on Amazon for just $100 more, which is amazingly cheap. These are the key features listed on Amazon: 3840 x 2160 Panel Resolution, 4K up scaling, Thin Bezel Aspect Ratio: 16:9, Refresh Rate: 120Hz, Component & HDMI Support: 480I, 576I, 480P, 576P, 720P, 1080I, 1080P, 4k2k 30Hz (only HDMI) Video Connections: 1 Analog & Digital TV Tuner, 1 Component Video Input, Component Video (Y, Cb, Cr/Y, Pb, Pr): One VGA Input (15 pin, D-Sub) Audio Connections: 1 Stereo Mini Phono Jack Input (3.5 mm) (VGA Audio), 1 RCA Input (R & L), 1 Headphone: Stereo Mini (3.5 mm), 1 RCA Output (R & L) 3 HDMI Input, 2 USB Input (JPEG […]

February 25, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Atmel Adds SAM D21, D10 and D11 MCUs to Its ARM Cortex M0+ SAM D Family

Atmel launched SAM D20 MCU family based on ARM Cortex M0+ last year, and at Embedded World 2014, the company has launched three new MCU families featuring ARM ultra low power core with SAM D10, SAM D11, and SAM D21 families and their corresponding Xplained PRO development boards. Atmel four SAM D families target different applications and price points: SAM D10 – The smallest member of the SAM D family in terms of memory, pin count, and features. SAM D11 – Adds full-speed USB not available on the SAM D10. SAM D20 – “Offers a rich set of peripherals, flexibility, and ease-of-use with low power consumption.” SAM D21 – Adds features such as full-speed USB, DMA, high-end timers/counters to D20 design. I’ve compared the four families in the table below: SAM D10 SAM D11 SAM D20 SAM D21 # MCU in Family 4 4 15 12 MCU Core ARM Cortex-M0+ […]

February 25, 2014 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Atmel Introduces ARM Cortex M0+ based SmartConnect Wi-Fi Modules and SmartConnect Zigbee SoCs

In order for the Internet of Things to take off, wireless connectivity solutions with ultra low power, lost cost, and small footprint are needed. Atmel seems to have made a step in the right direction by launching SmartConnect Wi-Fi modules and Zigbee SoCs featuring an ARM Cortex M0+ core. SmartConnect Wi-Fi does not appear to be a single chip solution, but instead Atmel has created a family of Wi-Fi modules integrating the company’s ultra-low power Wi-Fi SoChip with an ARM Cortex M0+ based MCU. These modules will enabled battery-powered Wi-Fi connectivity for IoT endpoints such as thermostats, and temperature sensors in a cost effective way. The company will provide a software solution with application and security protocols such as TLS, TCP/IP stack and an RTOS, all of which can be downloaded via Atmel Studio 6 Integrated Development Platform (IDP). SmartConnect ZigBee SAM R21 combines an ARM Cortex M0+ core with […]

February 25, 2014February 25, 2014 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

$65 Cheerlink B712 and B716 Android Media Players Powered by Actions Semi ATM7029

Actions Semi ATM7029 is a quad core ARM Cortex A5 class SoC usually found in low cost Android tablets. A manufacturer, which might be Egotronics, has decided to make Android STBs with the processor, and B712 and B716 are now sold for about $65 on dx.com under the brand Cheerlink. This price should make them one of the cheapest full size quad core Android TV boxes on the market, albeit with much lower performance compared to devices based on Rockchip RK3188 or AllWinner A31. Cheerlink B712/B716 specifications: SoC – Actions Semi ATM7029 Quad Core ARM Cortex A5 @ 1.2 GHz with Vivante GC1000 Plus GPU System Memory – 1GB SDRAM DDR3 (512MB as an option) Storage – 4 GB NAND Flash (8GB/16GB as options) + microSD slot up to 32GB Video & Audio Output – HDMI 1.4A, AV (3.5mm jack) Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi USB – 2x […]

February 25, 2014February 25, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Samsung Galaxy S5 Features Qualcomm Snapdragon 801 SoC, an Heart Rate Monitor and a Finger Scanner

[Update: See comment below. There will be two version of the Samsung Galaxy S5. One with Qualcomm Snapdragon 801 Quad core SoC @ 2.5 GHz, and the other with an Exynos Octacore processor @ 2.1 GHz] Samsung has unveiled the expect Galaxy S5 smartphone at Mobile World Congress 2014. It’s not based on any new Exynos processors however, as it appears to feature the Qualcomm Snapdragon 801 SoC, an update of Snapdragon 800 with a higher CPU clock (2.5 GHz), GPU clock (578 MHz) and support for eMMC 5.0. The phone is quite a major leap compared to Galaxy S4, but the company has added an heart rate monitor, a finger scanner as well as LTE-Advance, and 4K video recording. Samsung Galaxy S5 Specifications (Preliminary): SoC – 2.5GHz quad-core application processor. Turns out it should be Qualcomm Snapdragon 801 (MSM8974-AC) quad core Krait SoC with Adreno 330 GPU System Memory – […]

February 24, 2014February 24, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

VIA VAB-1000 Pico-ITX Board Features VIA Elite E1000 Dual Cortex A9 SoC, Targets Embedded Android and Linux

Via has introduced VAB-1000 Pico-ITX board at Embedded World 2014. This new embedded board features VIA Elite E1000 dual Cortex A9 SoC together with 2GB DDR3 SDRAM, 4GB eMMC Flash memory, and numerous I/Os. The board targets interactive kiosk, digital signage and HMI (Human Machine Interface) applications running Android or Linux. VIA VAB-1000 Specifications: SoC – VIA Elite E1000 dual core Cortex A9 SoC with unnamed 2D/3D GPU with Unified Shader Architecture featuring 64 stream processors System Memory – 2GB DRR3 Storage – 4GB eMMC + microSD slot Back panel I/O 2x HDMI connectors for HDMI-in and HDMI-out 2x mini-USB 2.0 port 1x MicroSD slot 1x Gigabit Ethernet port 1x DC-in Jack. Front panel I/O 1x pin header for two additional USB ports 1x pin header for SPI and 8-pin GPIO 1x pin header for three I2C and two COM ports 1x pin-header for front audio (Line-in/Line-Out/Mic-In). Internal I/O 1x […]

February 24, 2014February 24, 2014 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Nokia Launches Nokia X Android Phones with Microsoft Services

After months of speculations and leaks, Nokia has formally announced Nokia X family of Android phones that instead of coming with Google services, comes with Microsoft services and user interface, as well as Nokia apps. Three phones has been announced, namely NokiaX, Nokia+ and NokiaXL. Let’s look at the specifications: SoC – Qualcomm Snapdragon S4 dual core @ 1 GHz System Memory – 512 MB RAM (Nokia X), or 768 MB RAM (Nokia X+/XL) Storage – 4GB NAND flash + micro SD card up to 32 GB Display Nokia X/X+ – 4″ IPS LCD touch screen – WVGA (800 x 480) Nokia XL – 5″ IPS LCD touch screen – WVGA (800 x 480) Connectivity – Wi-Fi 802.11 b/g/n, Bluetooth 3.0 + HS Cellular Networking – GSM: 850 MHz, 900 MHz, 1800 MHz, 1900 MHz, WCDMA: 900 MHz, 2100 MHz. Dual (micro) SIM card slots. Camera Nokia X/X+ – 3MP […]

February 24, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Firefox OS Smartphones, Tablets and Reference Designs at Mobile World Congress 2014

Beside the $25 smartphone, Mozilla has also announced a number of smartphones and tablets running Firefox OS during an event at Mobile World Congress 2014. The first devices such as ZTE Open featured a single core processor, the new models come with more powerful dual and quad core processors, mostly from Qualcomm, but also WonderMedia and AllWinner, together with better screen and features. Let’s have a look. ZTE Open C and Open II ZTE Open C smartphone features a 4″ display (800 x 480 resolution), powered by Qualcomm Snadragon 200 SoC @ 1.2 GHz, 512MB of RAM, a 2MP camera, as well as a 1,200mAh battery. Engadget has an hands-on video. ZTE Open II sports a 3.5″ (HVGA -> 480×320) display, with a dual core Snapdragon processor @ 1.2 GHz, 256 MB, 2GB flash, a 2MP camera, and a 1150 mh, according to CNet. It also supports 3G networks. Both […]