Audio Category - Page 18 of 34 - CNX Software

May 11, 2019May 12, 2019 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Volumio Motivo is a Gorgeous Audio Streamer Powered by SOPINE A64 SoM

Volumio is a well-known Linux based open source music player for Raspberry Pi, UDOO, Cubox-I, Beaglebone Black, and other single board computers. Some companies even made audiophile boards with support for Volumio including Khadas Tone high-resolution audio board for VIM/VIM2 SBC’s, and the tiny VoltaStream ZERO following Raspberry Pi Zero form factor. But Volumio team has decided to make their own hardware with Motivo, an awesomely looking audio streamer designed in collaboration with Yottamusic engineering firm, and Design Narratives industrial design company. Motivo was introduced at High-End Munich, the world’s biggest Hi-Fi trade fair, and Pine64 posted some photos in a tweet claiming it was powered by their SOPINE A64 system-on-module. The full details about the device have not been published at the time of writing, but we can still derive some of Volumio Motivo specifications and key features from the photos and a few bits of public information: System-on-Module […]

May 5, 2019May 5, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Grove AI HAT Helps Raspberry Pi Run Edge Computing Workloads

Last year we wrote about Kendryte K210 dual core RISC-V processor specifically designed for for machine vision and machine hearing as well as the corresponding Kendryte KD233 which enables inference at the edge, e.g. tasks such as face recognition or object detection. Latter on we found the processor in Sipeed M1 module which went for as low as $5 in a crowdfunding campaign, and was fitted to some low cost boards now selling for $12.90 on Seeed Studio. The latter company has now designed Grove AI HAT that aims to assist Raspberry Pi in running the edge computing workloads previously described, as exposes 6 Grove interfaces to extend functionality with some of the Grove add-on modules. Grove AI HAT specifications: AI Module – Sipeed “MAIX” M1 with Kendryte K210 dual core RISC-V processor @ 600 MHz, KPU Convolutional Neural Network (CNN) hardware accelerator, APU audio hardware accelerator, 8 MB general […]

April 18, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

$50 Anker Roav Bolt Car Charger is Optimized for Google Assistant

While it may be tempting to check your messages, make phone calls or checking something on your smartphone while driving, it’s never a good idea. But thanks to Anker Roav Bolt car charger with built-in Bluetooth connectivity and a microphone array, you can perform those tasks through Google Assistant while keeping your eyes on the road. Anker Roav Bolt key features and specifications: Voice Chip – Far-Field Voice Processor Audio 2x MEMS Microphones 3.5mm audio jack Noise cancellation, acoustic echo cancellation Connectivity – Bluetooth 4.2 Misc – 1x physical button used to trigger GVA (Google Voice Assistant), 4x RGB LED Power Input – 12V-24V cigarette lighter sockets USB Output – 24W, 5V/2.4A max per port, Anker PowerIQ Technology So you get to charge your phone, while it is connected to your car audio system over Bluetooth or the audio jack, and make calls, start listening to a podcast, or ask […]

April 14, 2019 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

$59 ONE Mini Pocket Multilingual Assistant Supports 12 Languages (Crowdfunding)

I had a look at voice translator devices several years ago, and most would go for $200 or more, so when I was informed about ONE Mini pocket multilingual assistant selling for $59 US it caught my attention. The device supports 12 languages using machine translation for live interpretation of short sentences, speech to text transcription, and a professional interpretation service connecting you to human interpreters for more complex conversations is also offered. ONE Mini hardware specifications: WiSoC – Airoha 1526P Bluetooth Audio chip Connectivity – Bluetooth 5.0 dual mode with A2DP 1.3, HFP 1.7, HSP 1.2 Audio – Dual microphone MEMS 59 dB with noise reduction; speaker; headphone jack; AAC decoding USB – 1x USB type-C port for charging Misc – Breathing light, functional light, buttons for power, volume, translation key A & B, and record/interpreter button Battery – 250 mAh battery good for about 10 hours of recording/calling, […]

February 17, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Pico-ITX i.MX8M Board Enables Offline Voice Control with Snips

A few days ago, we covered Estone Technology’s MJ-100 RK3399 rugged tablet. I’ve just realized Estone Technology used to promote their embedded product under the Habey USA brand, which we covered a few times here, and the company has also announced another new product ahead of Embedded World 2019 with their EMB-2238 Pico-ITX i.MX8M board specifically designed for voice control applications. The company setup two voice control demos with the board: one with Amazon Alexa Voice Service (AVS) and another with Snips that works locally without any Internet connection. We actually came across Snips previously for an article comparing microphone arrays, but I never looked into Snips into details or saw an actual demo. Let’s have a quick look at EMB-2238 board specifications first: SoC – NXP i.MX 8MQuad with 4x Arm Cortex-A53 cores @ 1.5GHz, 1x Arm Cortex-M4 realtime-core @ 266MHz, Vivante GC7000L/GC7000LVX with support for OpenGL/ES 3.1, OpenGL […]

January 30, 2019 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Kodi 18 “Leia” Released Ahead of FOSDEM 2019

As one should have expected based on the abstract of the upcoming Kodi presentation at FOSDEM 2019, Kodi 18 “Leia” has just been released a few days before the 2-day open source developer event. It’s been nearly two years since the release of Kodi 17 “Krypton”, and it took a little longer than initially expected for Kodi 18 to become stable enough for an official since there have been so many changes including half a million lines of code added by 36 open source developers, close to 10,000 commits for almost 9,000 changed files. Some of the improvements in Kodi 18 include: Retroplayer gaming with support for gaming emulators, ROMs and game controls. Digital Rights Management (DRM) decryption support to play subscription content Improved Music Library with better filtering, faster API access, and more Live TV improvements including support for new back-ends like Zattoo, Teleboy, and Sledovanitv.cz, as well as enhanced […]

January 25, 2019January 25, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

96Boards HiChips Parrot Board and 3-Mic Array Work with Amazon Alexa

96boards Parrot Board Amazon-AVS 3-Mic far field board

Early last year, Banana Pi unveiled Allwinner SoC-Only 3-Mic Far-Field Development Kit for Amazon AVS, a board powered by Allwinner R18 processor extended with an external 3-mic array board, officially supported by Amazon Alexa Voice Service (AVS), and sold for $129 plus shipping. There’s now a compatible board following 96Boards CE Extended form factor, and selling for just $79.99 plus shipping on Alibaba or 555.99 CNY on 1688.com. The board looks almost the same as the original 3-Mic far-field development kit, apart from the LS and HS connectors found in the 96Boards hardware platforms. Hichips Parrot board should not be confused with Allwinner R16 based Parrot board that was used by Allwinner internally, and never made available to the general public. Hichips Parrot board specifications: SoC – Allwinner R18 quad-core Cortex-A53 processor @ 1.15GHz with Mali400MP2 GPU System Memory – 1GB DDR3 Storage – 8GB eMMC flash, micro SD card […]

January 9, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

NXP Immersiv3D Enables DSP-Free Dolby Atmos & DTS:X Audio Systems

High-fidelity audio systems such as soundbars, smart speakers, and AV receivers have traditionally relied on DSPs (Digital Signal Processors) to deliver low-latency audio processing, and enable audio and video synchronization. DSPs add to the cost of the overall design however, and with Immersiv3D technology, NXP has leveraged Arm Cortex-A53 and M4 cores in their NXP i.MX 8M Mini processor to completely remove the need for DSP in audio systems, shaving the BoM cost by up to 20% according to an article on EETimes. Immersiv3D also enables immersive audio support with Dolby Atmos and DTS:X, advanced audio pre/post processing, advanced features like voice control for the smart home. Immersiv3D audio solution was designed to help OEMs to bring to market affordable consumer audio devices with Dolby Atmos and DTS:X, and beside the audio processing software, NXP is also offering an Immersiv3D audio reference design to help them delelop sound bars based […]