Sayantan Nandy, Author at CNX Software - Embedded Systems News

November 26, 2024November 25, 2024 by Sayantan Nandy - No Comments

Clipper HAT Mini – A Raspberry Pi 4G LTE pHAT with Qwiic/STEMMA QT connector

pimoroni LTE 4G for Raspberry Pi Clipper HAT Mini

Pimoroni Clipper HAT Mini – also called “CLIPPER LTE Mini HAT” – is a Raspberry Pi 4G LTE pHAT that can use mobile data for remote projects where WiFi connectivity is unreliable or unavailable. The HAT is built around a SIMCom A7683E LTE Cat 1 modem with support for frequency bands B1/B3/B5/B7/B8/B20/B28, offering uplink speeds up to 5 Mbps and downlink speeds up to 10 Mbps. Other key features of this HAT include a SIM card slot, an SMA antenna connector (antenna sold separately), two user buttons, indicator LEDs, and a Qwiic/STEMMA QT connector for I2C modules. The board is designed to attach to Raspberry Pi (Zero) via a pre-soldered socket header and includes introductory global data coverage via a 1NCE SIM card. These features make this device suitable for IoT projects, mobile data collection, and remote-controlled devices in varied environments. Raspberry Pi LTE 4G HAT Specifications Compatibility – Supports […]

November 25, 2024November 25, 2024 by Sayantan Nandy - 3 Comments

nRF54L15 DK: A Development Kit for nRF54L15, nRF54L10, and nRF54L05 SoCs with Bluetooth, Thread, and Zigbee

The nRF54L15 DK is a development kit designed to evaluate the wireless SoCs of the nRF54L15, nRF54L10, and nRF54L05 wireless SoCs. These SoCs support multiple wireless protocols, including Bluetooth Low Energy, Bluetooth Mesh, Matter, Thread, Zigbee, and 2.4GHz proprietary protocols, with data rates of up to 4Mbps. The kit integrates the nRF54L15 SoC and provides emulation capabilities for the nRF54L10 and nRF54L05, enabling flexible testing and development across the nRF54L Series. The nRF54L series SoCs differ in memory configurations to meet various application requirements. The nRF54L15 includes 1.5 MB of non-volatile memory (NVM) and 256 KB of RAM for high-performance applications. The nRF54L10 features 1.0 MB of NVM and 192 KB of RAM for mid-range use cases, while the nRF54L05 offers 0.5 MB of NVM and 96 KB of RAM for entry-level designs requiring fewer resources. The kit is supported by the nRF Connect SDK and tools, providing access to […]

November 25, 2024November 23, 2024 by Sayantan Nandy - 2 Comments

SparkFun introduces Quadband GNSS RTK Breakout board with Quectel LG290P module for high-precision navigation

SparkFun has released the Quadband GNSS RTK Breakout featuring the Quectel LG290P module designed for high-precision real-time kinematic (RTK) applications. It supports GPS, GLONASS, Galileo, BDS, QZSS, and NavIC constellations, with the ability to simultaneously receive signals from L1, L2, L5, and L6/E6 frequency bands. The module includes support for SBAS augmentation systems (e.g., WAAS, EGNOS, GAGAN) and PPP services (e.g., BDS PPP-B2b, QZSS CLAS), delivering reliable positioning with fast convergence times for precision navigation tasks. The breakout board offers a compact design (43.2 x 43.2mm) and multiple expansion options including 24 PTH pins, dual 4-pin JST Qwiic connectors, three UART interfaces, a USB-C connector, and additional PTH pins for BlueSMiRF/Serial-to-UART. With its RTK support and advanced GNSS capabilities, the board is ideal for applications requiring high-accuracy positioning and robust navigation performance. Previously, we covered several GNSS boards including the SparkFun GNSS L1/L5, u-blox EVK-LEXI-R10, and Conexio Stratus Pro and […]

November 21, 2024November 21, 2024 by Sayantan Nandy - 1 Comment

AAEON FWS-2370 network appliance features Intel Atom Parker Ridge/Snow Ridge processor, up to 14 Ethernet ports

The FWS-2370 is a network appliance powered by the Intel Atom C Series “Parker Ridge” or P Series “Snow Ridge” processor family (Atom C5315 by default), tailored for SD-WAN and uCPE applications. It incorporates Intel QAT and Intel VT-d/VT-x to accelerate encryption, decryption, and virtualization tasks. The system supports up to 64GB of DDR4 memory (ECC/Non-ECC) through dual SODIMM slots and offers onboard eMMC storage options up to 128 GB. Networking capabilities include four 2.5GbE RJ-45 ports (Intel I226-V), four gigabit Ethernet RJ-45 ports (Marvell 88E1543), and four 10GbE SFP+ ports, with optional PoE af/at support for enhanced deployment flexibility. For connectivity, the FWS-2370 features two M.2 B-Key slots for 5G/LTE modules, one M.2 E-Key slot for Wi-Fi, and two Mini Card slots with SIM support. This expansive configuration ensures seamless wired and wireless networking. Designed to manage high data throughput and multi-threaded workloads, the FWS-2370 is ideal for applications […]

November 20, 2024November 19, 2024 by Sayantan Nandy - 2 Comments

DFRobot EDGE102-DMX512 lighting controller combines ESP32-S3 MCU and DMX512 protocol chip

EDGE102 DMX512 Lighting Programming Controller

DFRobot’s EDGE102-DMX512 is a DMX512 lighting programming controller based on ESP32-S3 wireless MCU designed for efficient management of stage, theater, and venue lighting. With integrated WiFi and Bluetooth, the controller supports wireless programming and control, simplifying the setup of advanced lighting systems. It offers RS485 (master/slave modes) interfaces, I2C, UART, and GPIO pins for compatibility with a wide range of sensors and boards. This controller enables automation through sensor integration, supporting devices such as infrared detectors, sound level meters, and laser sensors. Its eight optically isolated industrial switch inputs ensure seamless compatibility with PNP sensors, allowing lighting effects to respond automatically to environmental inputs. By reducing dependence on manual DMX consoles, it is well-suited for automated lighting in theaters, stages, and commercial venues. EDGE102-DMX512 specifications: SoC – Espressif ESP32-S3 CPU – Dual-core Tensilica LX7 up to 240 MHz with vector instructions for AI acceleration Memory – 512 KB of internal […]

November 18, 2024November 18, 2024 by Sayantan Nandy - No Comments

Jetway MF30 – A 3.5-inch SBC with 13th Gen Intel Core i5-1335U/1335UE Raptor Lake SoC, quad display support

The Jetway MF30 is a 3.5-inch subcompact board powered by 13th-generation Intel Core Raptor Lake-P U-series processors, including the Intel Core i5-1335U and Core i5-1335UE. Designed for embedded applications such as digital signage, control systems, gaming setups, and transportation hubs, the board supports versatile high-definition multi-screen configurations with two HDMI ports, two DisplayPorts, one Type-C DP, and one LVDS/eDP interface. For connectivity, the MF30 offers dual 2.5GbE ports, three USB 3.2 Gen2 ports, four USB 2.0 ports, and a USB Type-C port, while storage options include SATA III port and M.2 (2242/2280) sockets. Jetway is well known for its SBCs, and we’ve previously covered products like the JMTX-ADN8, JNUC-ADN1 mini-ITX motherboard, and JF35-ADN1 3.5-inch motherboard all powered by the Intel N97 CPU. Additionally, we’ve explored other SBCs and Mini PCs featuring 13th-gen Raptor Lake SoCs, including the iBASE IB961, GEEKOM GT13 Pro, Cincoze DV-1100, and LattePanda Sigma. If you’re interested […]

November 14, 2024November 14, 2024 by Sayantan Nandy - 1 Comment

EDATEC ED-GWL1010: Amlogic S905X4-based PoE-enabled LoRaWAN gateway targets Smart Buildings and IoT applications

The AMLogic S905X4 SoC is typically found in TV boxes, but EDATEC has integrated the quad-core Cortex-A55 SoC into its ED-GWL1010 LoRaWAN IoT gateway designed for smart buildings and industrial IoT networks requiring long-range, low-power connectivity. The ED-GWL1010 is built around the ED-REIMEI1 single-board computer, combining a mainboard and an expansion board. It integrates Semtech’s latest SX1302/SX103 baseband chip and a Microchip ATECC608 security chip for enhanced protection. The gateway offers up to 8GB LPDDR4 and 32GB of eMMC storage. For connectivity, it supports dual-band WiFi, Bluetooth 5.0, 10/100Mbps Ethernet with PoE, and a mini PCIe slot for a LoRa module compatible with both American and European LoRa frequencies (US915, AU915, AS923, EU868). It also features USB 3.0, an RGB LED indicator, a user button, and flexible power options through a 7-18V DC input or PoE. The ED-GWL1010 operates reliably in temperatures ranging from -25°C to 50°C and is housed […]

November 8, 2024November 10, 2024 by Sayantan Nandy - No Comments

Portwell PJAI-100-ON rugged Edge AI embedded system features NVIDIA Jetson Orin Nano for industrial quality control

Portwell has launched the PJAI-100-ON, a rugged and compact embedded system powered by the NVIDIA Jetson Orin Nano SOM and designed for demanding industrial environments. It operates reliably across a wide temperature range of -20°C to 60°C with a fanless, quiet design that requires minimal maintenance. Equipped with dual Gigabit Ethernet LAN ports and M.2 slots for wireless connectivity, the PJAI-100-ON is tailored for Edge AI applications. This system enhances quality control in manufacturing by using advanced optical inspection technology to detect defects, improving quality assurance and reducing production errors. Previously, we covered other Jetson Orin Nano embedded systems, including Aetina’s AIE-KO21, AIE-KO31, AIE-KN31, and AIE-KN41 and DFI X6-MTH-ORN fanless Edge AI Box computer, as well as Portwell’s WEBS-21J0-ASL another rugged embedded system built around an Intel Atom x7000RE Amstom Lake Nano-ITX motherboard and equipped with an Hailo-8 AI accelerator. Portwell PJAI-100-ON specifications: SoM – NVIDIA Jetson Orin Nano CPU […]