Debashis Das, Author at CNX Software - Embedded Systems News

September 24, 2024September 24, 2024 by Debashis Das - No Comments

Adafruit Feather RP2350 board with HSTX port enables video output and display interfaces

“Adafruit Feather RP2350 with HSTX port” is a Raspberry Pi RP2350 MCU development board that features an onboard 22-pin high-speed serial transmit interface (HSTX) port. The board also features a built-in 200mA+ LiPo charger, an RGB LED, a STEMMA QT connector, and a USB Type-C port for power and programming. The board is compatible with FeatherWings and supports development with various programming languages. These features make this board suitable for a wide range of applications, from embedded projects and IoT devices to educational purposes and prototyping. Previously we have covered a variety of RP2350-powered development boards, including the MOTION 2350 Pro, designed for robotics and motor control; the Solder Party’s RP2350 Stamp, ideal for space-constrained applications; and the WIZnet Raspberry Pi RP2350 boards designed for IoT and internet-connected applications. Feel free to check those out if you want to take a look at some of the unique development boards. Adafruit […]

September 23, 2024October 2, 2024 by Debashis Das - 1 Comment

MachineQ MQpower CT battery-less LoRa CT clamp measures up to 250A of current

MachineQ has recently introduced MQpower CT, a self-powered, IoT-enabled, LoRa CT clamp designed to monitor real-time current consumption. This CT clamp can measure both accumulated (Ah) and instantaneous current(A) with loads up to 100A and 250A with 1mA resolution. Additionally, it integrates a LoRa module for communication that gets powered by the induced current in the clamp itself. These features make this device useful for energy management, proactive maintenance, power monitoring, and more. We have covered various WI-Fi CT clamps in the past like the SONOFF POW Ring, the Emporia Vue Gen2 with 16 CT clamps, the ESP32-S2-based “smart power meter”, and more. Feel free to check those out if you are interested in Wi-Fi CT clamps. MQpower LoRa CT clamp specifications Connectivity – LoRaWAN Measurement range Up to 100A or 250A models 1mA resolution Accuracy ±1% (>5Arms) ±3% (≤5Arms) Misc Onboard reboot button and LED status indicator FUOTA (Firmware Update Over […]

September 22, 2024September 23, 2024 by Debashis Das - 4 Comments

Waveshare 4-inch E-ink Spectra 6 full-color e-paper display is designed for the Raspberry Pi

Waveshare 4 inch, spectra 6 color e paper display

Waveshare recently launched the 4-inch e-Paper HAT+(E), a E-Ink Spectra 6 full-color e-paper module designed to work with the Raspberry Pi using the HAT+ standard. This 600×400 pixel display includes E-Ink Spectra 6 technology and doesn’t have a backlight. The Spectra 6 allows for high contrast and color saturation whereas no backlight means the display consumes very low power. The device communicates using SPI and is compatible with various controller boards like Raspberry Pi and Arduino. These features make this device useful for places like supermarkets, unmanned stores, shelf levels, hospital wards, and more. Waveshare has launched various e-paper displays in the past including the EINK-DISP-103 E-paper HDMI Display, the 4.2″ and 7.5″ Waveshare NFC-powered e-Paper display, and most interestingly the 7-Color e-Paper Display. Feel free to check those out if you are looking for high-quality displays. Waveshare 4-inch spectra 6 color e-paper display specification Display – E-Ink Spectra 6 […]

September 20, 2024September 19, 2024 by Debashis Das - No Comments

NXP Trimension SR250 short-range UWB radar supports secure ranging for Smart Homes and Industrial IoT

NXP Semiconductors has recently introduced Trimension SR250 UWB radar, which NXP is calling the industry’s first single-chip solution that combines on-chip processing with short-range ultra-wideband (UWB) radar and secure UWB ranging. Operating at 6-8.5 GHz, the SR250 supports features like 3D angle-of-arrival (AoA), time difference of arrival (TDOA), and time of flight (ToF) measurements accurate to within ±5 cm. The integrated on-chip radar processing reduces power consumption, which increases efficiency and it can work with AI/ML algorithms on host processors like NXP’s i.MX, RW61x, and MCX families. The SR250 is supported by firmware, middleware, and sample applications, simplifying development and deployment. Applications for this device include smart home automation (e.g., turning devices on/off based on presence), secure access, and safety monitoring, as well as industrial uses such as worker tracking, collision avoidance, and danger zone detection. Trimension SR250 UWB radar specification 3D secure ranging Fully interoperable with IEEE 802.15.4z HRP […]

September 19, 2024 by Debashis Das - 1 Comment

AAEON GENE-ASL6 – A 3.5-inch industrial Amston Lake SBC with triple display interfaces and triple 2.5GbE

AAEON GENE-ASL6 is an Intel Atom x7000RE-series Amston Lake powered 3.5-inch single board computer (SBC) featuring three 2.5GbE RJ45 ports and three independent display outputs via HDMI, LVDS, and VGA. The GENE-ASL6 can be configured with up to 16GB of LPDDR5 memory and supports a variety of storage options including SATA, mSATA, and M.2 NVMe SSD options. There is also an M.2 2230 E-Key slot for Wi-Fi and Bluetooth connectivity and the other M.2 3052 B-Key slot can be used for storage or to connect 4G or 5G modules. Other than that, this board features a variety of connectivity options including USB 3.2 Gen 2 ports, serial ports, GPIO, SMBus/I2C, optional audio header, and much more. AAEON GENE-ASL6 3.5-inch industrial SBC specification Amston Lake SoC (one or the other) Intel Atom x7213RE dual-core processor @ 2.0 to 3.4 GHz with 6MB cache, 16EU Intel UHD graphics; 9W TDP Intel Atom x7433RE […]

September 16, 2024September 18, 2024 by Debashis Das - 12 Comments

Raspberry Pi RP2350 dev board features Ethernet RJ45 port with WIZNet W5500 or W5100S Ethernet controller

Wiznet W5500 EVB Pico2 and W5100S EVB Pico2 Dev boards

WIZnet has recently launched two new Raspberry Pi RP2350-based Ethernet boards – W5100S-EVB-Pico2 and W5500-EVB-Pico2 – based on different Ethernet controllers. The entry-level W5100S-EVB-Pico2 is built around the W5100S controller that features 4 independent sockets and 16 Kbytes of buffer memory. On the other hand, the W5500-EVB-Pico2 is built around the W5500, which features 8 sockets, 32 Kbytes of buffer memory, and improved security features such as OTP memory, Secure Boot, and Arm TrustZone technology. These make the W5500-EVB-Pico2 ideal for projects with robust network handling and advanced security measures. After the recent announcement of the $5 Raspberry Pi Pico 2 we have seen many development boards built around the RP2350 MCU, including the Challenger+ RP2350 WiFi6/BLE5, the Solder Party’s RP2350 Stamp, the Seeed Studio XIAO RP2350, the Cytron MOTION 2350 Pro, and more. Feel free to check those out If you are interested in RP2350-based dev boards. W5100S-EVB-Pico2 and […]

September 14, 2024September 14, 2024 by Debashis Das - No Comments

AAEON PICO-ASL4 industrial Pico-ITX SBC ships with Intel Atom x7000RE, up to 16GB DDR5, 2.5GbE LAN

AAEON PICO ASL4 Rev.B Intel Atom x7000RE Pico ITX SBC

AAEON PICO-ASL4 is a fanless, latency-sensitive Pico-ITX single board computer (SBC) built around the Intel Atom x7000RE-series “Amston Lake” SoCs and configurable with up to 16GB of DDR5 memory. The SBC supports dual display outputs via HDMI and LVDS/eDP and features four serial ports: two RS232/422/485 and two RS232. For networking, it provides dual Ethernet connectivity with Intel i226 2.5GbE and Realtek RTL8111H 1GbE controllers, both supporting TSN and TCN. Additionally, it offers a variety of expansion options, including a full-sized mSATA/mPCIe slot and an M.2 2230 E-Key socket for WiFi and Bluetooth. For further connectivity, there are four USB 2.0 ports, two USB 3.2 Gen 2 ports, as well as GPIO and SMBus/I2C headers. AAEON PICO-ASL4 (Rev.B) specifications SoC – Intel Amston Lake (one or the other) Intel Atom x7433RE, 4 cores, 1.5GHz, 9W TDP Intel Atom x7835RE, 8 cores, 1.3GHz, 12W TDP System Memory – Up to 16GB DDR5 […]

September 12, 2024September 11, 2024 by Debashis Das - 1 Comment

Low-cost Raspberry Pi 5 HAT+ combines M.2 socket for NVMe SSD and PoE power input

With a cost of only about $25, Waveshare has recently introduced the PoE M.2 HAT+ for the Raspberry Pi 5, which is much cheaper than the similar N-Fuse PoE HAT that we’ve written about previously. As the name implies, this new Waveshare board supports Power over Ethernet (PoE) and features an M.2 slot to add NVMe SSD storage to the latest Raspberry Pi SBC. This new Waveshare HAT complies with the 802.3af/at standards and can deliver up to 25.5W of power to the Pi 5, enabling both power and network connectivity over a single Ethernet cable. Additionally, it features onboard 5V & 12V header outputs for powering additional devices like cooling fans, and there are also two LEDs for status. A fast storage device and the ability to power the device with ethernet makes this device suitable for applications such as network-attached storage, media centers, and edge computing applications. Waveshare […]