Author: Jean-Luc Aufranc (CNXSoft)

Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.
Posted on by Jean-Luc Aufranc (CNXSoft) - 247 Comments on Giveaway Week 2023 – i-Pi SMARC 1200 devkit with Mediatek Genio 1200 Cortex-A78/A55 SoC

Giveaway Week 2023 – i-Pi SMARC 1200 devkit with Mediatek Genio 1200 Cortex-A78/A55 SoC

i-Pi SMARC 1200 Yocto Linux glmark2 benchmark

We’ll end this year’s Giveaway Week with a pretty powerful development kit – ADLINK i-Pi SMARC 1200 – powered by a MediaTek Genio 1200 octa-core processor with four Cortex-A78 cores @ up to 2.2 GHz, four Cortex-A55 cores, an Arm Mali Mali-G57 MC5 GPU, 4K hardware video decoding and decoding support, and a 4.8 TOPS NPU. The mainboard is comprised of a SMARC 2.1-compliant system-on-module with 4GB LPDDR4 memory and 64GB UFS storage and fitted with a heatsink for cooling as well as a carrier board with a 4Kp60 capable HDMI 2.0 port, two Gigabit Ethernet ports, two USB 3.0 ports, two USB 2.0 ports, a 3.5mm audio jack, two 40-pin headers for I/Os including one compatible with the 40-pin Raspberry Pi GPIO header, plus LVDS connectors, MIPI CSI camera connectors, and M.2 expansion slots for storage and/or wireless expansion. I tested the MediaTek Genio 1200 devkit with a Yocto […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 208 Comments on Giveaway Week 2023 – Elecrow ESP32 Terminal with a 3.5-inch touchscreen display and OV2640 camera

Giveaway Week 2023 – Elecrow ESP32 Terminal with a 3.5-inch touchscreen display and OV2640 camera

Elecrow ESP32 Terminal giveaway

If I remember correctly, Elecrow sent me an end-of-year gift with a notebook (paper style), a pen, and a 3.5-inch ESP32 terminal. I had completely forgotten about it, and while wondering what I would give for Giveaway Week 2023, and looking around in drawers and on shelves, I found an “ESP32 Terminal” package, and I was like “What the F is that and where is it coming from?”. Long story short, the 6th prize of this year’s giveaway week is Elecrow’s ESP32 Terminal with a 3.5-inch touchscreen display that also comes with a front-facing OV2640 camera and six Crowtail connectors for expansion plus a LiPo battery connector. Elecrow ESP32 terminal specifications: Wireless module – ESP32-S3 2.4 GHz Wi-Fi and Bluetooth 5 (LE) module with 16MB flash and 8MB PSRAM Storage – MicroSD card slot Display – 3.5-inch TFT LCD display with 480×320 resolution (ILI9488 driver), capacitive touchscreen Camera – 2MP […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Ubuntu Touch 20.04 OTA-3 release adds support for PinePhone and PineTab devices

Ubuntu Touch 20.04 OTA-3 release adds support for PinePhone and PineTab devices

Ubuntu Touch 20.04 OTA 3 PinePhone Pro

UBPorts has just released Ubuntu Touch 20.04 OTA-3 based on Ubuntu 20.04 LTS with the latest security updates and beta support for PinePhone, PinePhone Pro, PineTab, and PineTab 2, adding to the smartphones already supported by Ubuntu Touch 20.04 OTA-2. As a reminder, Ubuntu Touch was initially handled by Canonical for desktop/mobile convergence, but it was dropped when the company decided to refocus its efforts on cloud and IoT, and the UBPorts community took over and eventually outed the first stable Ubuntu Touch release in June 2017. The developers kept on improving the OS since then with new releases from time to time, but note that it should still be considered experimental only for most devices, and will not be suitable as a daily driver for the majority of people. The PinePhone and PineTab have been supported by Ubuntu Touch for a few years, but they had their own branch […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Gigadevice GD32VW553 RISC-V microcontroller supports WiFi 6 and Bluetooth 5.2 LE

Gigadevice GD32VW553 RISC-V microcontroller supports WiFi 6 and Bluetooth 5.2 LE

GD32VW553 WiFi 6 Bluetooth 5.2 LE

Gigadevice GD32VW553 is a new 160MHz RISC-V microcontroller for IoT applications with support for WiFi 6 (802.11ax) and Bluetooth 5.2 Low Energy (LE) and available in QFN32 and QFN40 packages with up to 28 GPIOs. As an IoT chip, the chip supports various power modes and target wake time (TWT) for low power consumption, as well as WiFi features such as WPA3 and WiFi direct, while the radio can handle Bluetooth 5.2 LE bit rates of up to 2 Mbps and support the Long Range mode. Gigadevice GD32VW553 specifications: MCU core – 32-bit Nuclei N307 RISC-V core @ up to 160 MHz with RV32I / M / A / F / D / C / P / B instruction extensions Memory – 320KB SRAM Storage – 2048KB or 4096KB flash Wireless WiFI 6 802.11b/g/n/ax HT20 up to 114.7Mbps 802.11e QoS Enhancement (WMM). 802.11i (WPA, WPA2, WPA3). Open, shared key, and […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 104 Comments on Giveaway Week 2023 – WCH CH583M-R0 development board and some RISC-V microcontrollers

Giveaway Week 2023 – WCH CH583M-R0 development board and some RISC-V microcontrollers

CH853M-R0 development board

Early this year, WCH sent me a few of their RISC-V MCU boards and chips to thank me for writing about their products. I gave one for review with some chips but it went to review heaven, or in other words, no review was ever written. I also sold a couple locally, and since I don’t think I’ll ever have time for a review, we are now giving away the remaining boards and chips here and on CNX Software Thailand. Today’s giveaway is the WCH CH583M-R0-1v1 board, also known as CH583EVT or CH583M-EVT-R0, based on the CH583 RISC-V Bluetooth 5.3 LE microcontroller that exposes all I/Os from the chip, a few buttons, and USB ports, and also features an SWD/UART header for debugging. You’ll find the documentation, code samples, an Android app and other resources to get started on GitHub. I’ll also throw all the remaining chips I have left […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 12 Comments on Firefly ROC-RK3588-RT Rockchip RK3588(J) SBC comes with three 2.5Gbps/gigabit Ethernet ports

Firefly ROC-RK3588-RT Rockchip RK3588(J) SBC comes with three 2.5Gbps/gigabit Ethernet ports

ROC-RK3588-RT router SBC

Firefly ROC-RK3588-RT is a Rockchip RK3588(J) SBC suitable for networking applications such as routers and firewalls thanks to one 2.5GbE port and two gigabit Ethernet ports and available in both commercial and industrial temperature grades. But the board is likely to be used for more complex workloads since it also comes with three video output interfaces (2x HDMI and USB-C DisplayPort), M.2 sockets for a SATA or NVMe SSD, a WiFi 6/Bluetooth 5.2 module, a 6 TOPS NPU embedded in the Rockchip processor, and a (non-standard) expansion connector with PCIe Gen 3 and other interfaces. Firefly ROC-RK3588-RT specifications: SoC (one or the other) Rockchip RK3588 octa-core processor with CPU – 4x Cortex‑A76  cores @ up to 2.4 GHz, 4x Cortex‑A55 core @ 1.8 GHz GPU – Arm Mali-G610 MP4 “Odin” GPU @ 1.0 GHz Video decoder – 8Kp60 H.265, VP9, AVS2, 8Kp30 H.264 AVC/MVC, 4Kp60 AV1, 1080p60 MPEG-2/-1, VC-1, VP8 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 26 Comments on Libre Computer AML-A311D-CC “Alta” SBC features Amlogic A311D AI processor

Libre Computer AML-A311D-CC “Alta” SBC features Amlogic A311D AI processor

Libre Computer AML-A311D-CC Alta SBC

Libre Computer has launched the credit card-sized “Alta” SBC, also known as AML-A311D-CC, designed for AI applications with the Amlogic A311D hexa-core Arm Cortex-A73/A53 processor equipped with a 5 TOPS AI accelerator. The board comes with 4GB LPDDR4, a 16MB SPI flash for the bootloader as well as a microSD card slot and eMMC flash module connector for storage, and offers many of the same ports as found on the Raspberry Pi 3 Model B+ with Gigabit Ethernet, four USB 3.0 ports, HDMI output, an AV jack, MIPI CSI and DSI connector, and a 40-pin GPIO header that should work with most Raspberry Pi HATs. AML-A311D-CC “Alta” specifications: SoC – Amlogic A311D CPU Hexa-core processor with 4x Arm Cortex-A73 cores @ up to 2.2 GHz and 2x Cortex A53 cores @ up to 1.8 GHz Built-in Cortex-M4 core for “always-on” processing GPU – Arm Mali-G52 MP4 GPU VPU 4K UHD […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 144 Comments on Giveaway Week 2023 – GL.iNet GL-S200 Thread Border Router devkit

Giveaway Week 2023 – GL.iNet GL-S200 Thread Border Router devkit

Getting Started GL-S200 Thread Border Router

It’s already day 4 of CNX Software Giveaway Week 2023 and today, we’ll be giving away GL.iNet GL-S200 Thread Border router kit that also includes three USB or battery-powered Thread development boards to experiment with various Thread topologies. The GL-S200 router comes with a Qualcomm QCA9531 MIPS router processor running a fork of OpenWrt and provides two Fast Ethernet WAN/LAN ports, 2.4 GHz Wi-Fi 4 802.11b/g/n up to 150 Mbps, and support for Thread (via an 802.15.4 radio) and Bluetooth 5.0. The development boards are based on the Nordic Semi nRF52840 microcontroller and each features a potentiometer+button, a PIR sensor, and two RGB LEDs. I reviewed the GL-S200 Thread Border router kit using the router’s dashboard interface and demo firmware provided for the three development boards. This enabled me to test star topology and mesh networking, and play around with demo scripts and code samples to display sensor and potentiometer […]

Exit mobile version
UP 7000 x86 SBC