Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

July 3, 2010April 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Finding large files in a Linux system

To list large files in a directory and subdirectories

find /home/user -type f -size +10000k -exec ls -lh {} \; | awk '{ print $NF ": " $5 }'

1	find /home/user -type f -size +10000k -exec ls -lh {} \; \| awk '{ print $NF ": " $5 }'

This command looks for files larger than 10MB in /home/user directory and displays the result as follows: /home/user/largefile1.tar.bz2: 32M /home/user/bugzilla.sql: 21M Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

July 1, 2010November 25, 2010 by Jean-Luc Aufranc (CNXSoft) - No Comments

Using vi as an hex editor

To use vi as an hexadecimal editor: vi doc.txt [esc] :%!xxd Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

June 26, 2010March 2, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

EP9307 Thin Client with DirectVNC

One of my reader had issues running Thin-clients ENTC Encore-1000 based on EP9307 and wanted to update the firmware in his systems. So I’ll explain how to access Linux, Windows XP or any other operating systems using a thin client based on Cirrus Logic EP9307 hardware. This is for reference only, and the performance may not be suitable for your environment/setup. One PC (server) is needed to run VNC (Virtual Network Computing) server for each remote desktop (i.e. each thin client), then the thin client can run the software without hard disk by just using the network connection. This can be used for checking emails, browsing internet, office applications, etc.. All resource heavy tasks are done on the server side whose specifications may be chosen to match the applications requirements. I’ll explain how to use Linux, but Windows XP (or any other operating systems for that matter) could also be […]

June 26, 2010 by Jean-Luc Aufranc (CNXSoft) - No Comments

IPAD Killer – Allgo Android Tablet

Ok, the title is a bit over the top but the Allgo tablet reference design running android would only cost around 35 USD to manufacture (15 dollars for the board, 15 dollars for the touch screen display and 5 dollars for the battery). So you’d be able to browse the web, read e-books, flicker through your pictures and access a wide range of applications through Google app store for less than 100 USD (retail) compared to the IPAD retail price of 499 USD that would seem like a bargain even though the performance is not as good as the IPAD (but still acceptable) as you can see in the video below. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

June 19, 2010June 19, 2010 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

ARM-based Android Set-Top-Box

Last month, I posted a blog entry about demo featuring Sigma Designs Android STB that was shown at CeBit last January. AFAIK this is still being developed and there is still no Android STB products based on Sigma Designs Chips that can be purchased. Earlier this month, another company Webia Technologies demo’ed an Android STB (HDMI 1080p – ARM 11) whose factory price would be 50 USD, which is well below the price of a similar Sigma Designs STB based on SMP8640 or SMP8650 series. They also showed a smaller box that can support 720p and selling for 25 USD (Factory price, not retail price). You can see the demo below showing both set-top-boxes. Interestingly enough, I was unable to find Webia Technologies website or other previous news about this company. All I found is Webia Technologies is supposedly registered in Hong Kong. Update: After searching which ARM-based solution may […]

June 19, 2010May 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Digital Signage Features – A Quick Guide to Select Your Digital Signage Solution

There are a lot of different digital signage solutions around and it may be difficult to find which one is right for you since there can be quite a few different features and options. So I’ll do my best to explain the main features to guide your choice if you are planning to purchase a digital signage solution (embedded signage player, content management software and server). I’ll focus this post on the digital signage player, but bear in mind the content manager software is equally very important. [ad#Google Adsense – Wide Banner] Hardware features Video outputs: composite, component (YPbPr), VGA, DVI, HDMI, LVDS The capability to output simultaneously to different video outputs maybe an advantage if your plan is to use one player to output to several monitors. Video resolution: Standard Definition (e.g. NTSC) vs. High Definition (e.g. 1080p) This is a simple choice based on costs and whether you […]

June 13, 2010November 18, 2010 by Jean-Luc Aufranc (CNXSoft) - No Comments

Embedded Software Quality Assurance (QA)

[ad#Google Adsense – Wide Banner] As for every software there needs to be quality assurance testing for embedded software with a special focus on reliability since this is often key in embedded systems. Software testing / QA may be a very controversial subject as everybody may have very diverging and strong opinions on how it should be done, and the way it is done also depends on the company culture (and size). So here’s the way I personally see the different steps to testing, please let me know if you feel otherwise in comments. Unit Testing: This is the lowest type of test (white box testing) where the developer should check the implemented functions work as expected Functional Testing: Although the software team should check if the main functionalities of the software work properly before committing the code (assuming you are using a version control system and you should), QA […]

June 6, 2010January 14, 2011 by Jean-Luc Aufranc (CNXSoft) - 47 Comments

Installing Android in HTC Touch Cruise Polaris – HTC P3650

If you have an HTC Touch Cruise (Polaris) running Windows Mobile 6.1, you may want to try out Android in this hardware. The good thing is that you do not need to remove Windows, but you can just bootstrap Linux from Windows Mobile. Just go to XDA Developers Forum below for further details: Android for HTC Touch Cruise Polaris or just follow the simple instructions below: Instructions to install Android in SDCard: Download either the 320×480 or 240×320 version Extract the content of the downloaded zip files to a temporary directory Rename default.polaris.txt to default.txt (rename or delete the original default.txt file) in andboot directory Copy extracted /andboot folder to the Root of your SDCard In your mobile phone, inside /andboot folder, Run HaRET, then hit “run” to launch android The first time, press Volume Up to start the installation and follow the menu instructions. If you don’t follow that […]