Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

September 5, 2013 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

SolidRun Announces Cubox-i Platform with Freescale i.MX6 for as low as $45

SolidRun has been providing tiny development platform such as Cubox and Cubox Pro featuring Marvell ARM compatible processors. However, the price of those platforms are well over $100, so the company decided to provide lower cost development platforms (Cubox-i) based on Freescale i.MX6 Solo/Dual Lite/Dual/Quad that sells for $45 and up. There are four versions: Cubox-i1 – Freescale i.MX6 Solo, 512 MB RAM, 10/100M Ethernet, optional Wi-Fi/Bluetooth module. Price: $44.99 Cubox-i2 – Freescale i.MX6 Duallite, 1GB RAM, 10/100M Ethernet, optional Wi-Fi Bluetooth module. Price: $69.99 Cubox-i2Ultra – Freescale i.MX6 Dual, 1GB RAM, Gb Ethernet (470 Mbit real), Wi-Fi and Bluetooth, SATA II. Price: $94.99 Cubox-i4Pro – Freescale i.MX6 Quad, 2GB RAM, Gb Ethernet (470 Mbit real), Wi-Fi and Bluetooth, SATA II. Price: $119.99 The devices measure 55mm x 55mm x 42mm. The full specifications are better seen in the comparison table found in SolidRun website. The 4 models all boot […]

August 31, 2013 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

NSZ-GU1, Sony’s Next Google TV Box will be an HDMI TV Stick

Since 2010, Sony has been working on Google TV device, and last year they announced Sony NSZ-GS7, a Google TV 2.0 set-top box. This year, nothing have been announced yet, but a few pictures of a new device have shown up in the FCC site. Sony NSZ-GU1 will be some sort of HDMI TV stick that you insert into your TV, except it looks more like a small set-top box has been glued onto an HDMI TV dongle. Here are the specifications derived from the FCC fillings and pictures: SoC- Marvel 88DE3108-A1 dual core processor (Marvell Armada 1500). System Memory – 1GB RAM Storage – 4GB NAND Flash (Toshiba THGBM5G5, If I’ve read correctly) Video I/O – HDMI output (MHL) 720p/60, micro HDMI input 720p/60 Connectivity – 802.11b/g/n WiFi (AzureWave AW-NH390), Bluetooth 3.0 USB – 1x micro USB port (for power only?) Misc – IR Blaster Power – 5V via […]

August 31, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Embedded Linux Conference Europe 2013 Schedule – Build Systems, Security, Device Tree, Debugging & Profiling Techniques, and More

Embedded Linux Conference Europe 2013 will conveniently start right after LinuxCon 2013, last 2 days (October 23-24), and take place at the same location: the Edinburgh International Conference Center, Edinburgh, United Kingdom. The Linux Foundation has published the schedule for the conference, so I’ll make my own virtual schedule with sessions that I find particularly interesting. Thursday – 24th of October 9:30 – 10:10 – Timeline For Embedded Linux by Chris Simmonds, Consultant, 2net Limited Today, Linux is woven into the fabric of our technology. Things such as printers, routers, TVs and phones all have their own “Inner Penguin”. Yet it was never originally intended to be used beyond desktop and server PCs. A lot of things had to happen before Linux could break out of the PC environment and make its way in the world as a jobbing jack-of-all-trades. Since the early beginnings of embedded Linux in the late 1990’s many people have contributed […]

August 30, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Preliminary Reverse-Engineered VPU Driver (CedarX) for AllWinner A10 Plays H.264 Videos

Allwinner framework for their Video Processing Unit (VPU) in their Cortex A8 processors (A10, A13, etc..) is called CedarX. It relies on a binary blob that is working just fine for Android, but not so well for Linux. So several developers started to reverse-engineer CedarX a while back, to fix issues with Linux, and provide an open source driver. Yesterday, they upload a video to show the development progress, and show Big Buck Bunny 1080p H.264 playback using libvdpau-sunxi open source driver with mplayer, and without any binary blobs. The video resize function are not been implemented yet, which is why we can only see the left corner of video, but nevertheless it shows an open source hardware video decoder is on the way. That means once the Lima driver for Mali-400 GPU, and libvdpau-sunxi driver for AllWinner VPU are implemented (which may still take a while), AllWinner A10 SoC […]

August 30, 2013August 30, 2013 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Pressy Adds a Physical Button to Your Phone via the Headphone Jack

As smartphones manufacturers are mostly getting rid off physical buttons on smartphones, Pressy is looking to add a smart one (think Morse code) via your headphone jack. It allows you do common tasks, such as turning on your flashlight, taking a quick photo, or calling your girl (or man), by the click, or a few clicks, of a button. This little add-on has already proved to be popular with some, as the developers have already raised $100,000 via Kickstarter for their $17 toy. There’s does not seem to be anything special inside the button/jack, and all the “magic” occur with the app (Available for Android only at the moment), which let you configure action based on short/long key presses like you would do with Morse code. If you want to use you headphone, simply remove Pressy, insert it in its optional key chain, and place your headphone to use them as […]

August 30, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linaro 13.08 Release With Linux Kernel 3.11 and Android 4.3

Linaro 13.08 has been released with Linux Kernel 3.11-rc6 (stating), Kernel 3.10.9 (LSK – beta), and Android 4.3. This month is the first release based on Android 4.3, which was only pushed to AOSP at the end of last month. I can also see work on new SoCs/hardware this month with Texas Instruments Keystone II ARM Cortex A15+DSP SoC and Fujitsu AA9 board (Which processor?, I could not find out). A lot of work also appears to have gone in OpenEmbedded, further optimizations have gone into NEON optimized AES encryption in OpenSSL, and more. It’s also the first time I can see a Ubuntu Raring engineering build image for HighBank (Calxeda Energycore). Here are the highlights of this release: Android Engineering Android stack was tuned to achieve 100% CTS pass result on Android 4.3 Analyzing the UEFI EDK II boot loader for Android completed, implementation of fastboot application and USB […]

August 29, 2013August 29, 2013 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

iPazzPort NC-812-19A Rockchip RK3066 mini PC Temporary Discounted to About $30

I’ve just been informed about a special offer (for 2 more days) on Aliexpress for a mini PC based on Rockchip RK3066 called iPazzPort NC-812-19A, but it looks very much like CX803-II. You can get a dual core HDMI TV stick with 1GB RAM, 4GB Flash and an external antenna for about $30 including shipping here or here. Here are the specifications: SoC – Rockchip RK3066 @ 1.6 GHz + Mali-400 MP4 GPU System Memory – 1GB DDR3 RAM Storage – 4GB NAND flash + micro SD slot (up to 32GB) Video Output – HDMI 1.4 Connectivity – Wi-Fi – 802.11 b/g/n USB – 2x micro USB port (OTG + power) + 1x USB host port Power – 5V Dimensions – 101.2 x 48 x 9.5 mm Weight – 36g The device is said to come with a USB cable, and a user’s manual (No power supply). Aliexpress listings do not […]

August 29, 2013 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

Broadlink SP1 Wi-Fi Smart Socket Can Be Turned On/Off by Android or iOS Devices

Broadlink SP1 is a smart socket with Wi-Fi connectivity that you can control remotely with your Android or iOS mobile device through a specific app in order to turn on and off lights, water heater, and other electrical appliances. This type of product already exists for example with Belkin Wemo, but Broadlink SP1 is cheaper as it sells for $32.90 including shipping, against $49.99 + shipping for Belkin Wemo Switch. So let’s have a closer look. For this type of device there aren’t that many technical specifications, but they are very important as you need to make sure it matches your electrical grid specs, equipment power rating, and socket type: Material – ABS Power Plug – Three flat-pin plug (Australia type) Voltage – 90~245V @ 50-60 Hz Output Current – 10A Output Power – 2200W Dimensions – 8.9 cm x 7.7 cm x 5.8 cm Temperature Range – -10’C to […]