Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

December 15, 2023December 20, 2023 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

COM Express Type 6 Compact module features 14th gen Intel Core Ultra “Meteor Lake” processor

ADLINK cExpress-MTL is a COM Express Type 6 Compact module based on the just-announced 14th gen Intel Core Ultra “Meteor Lake” processor family with up to fourteen CPU cores in 6P+8E configuration, eight Xe-cores (128 EUs), and an NPU (11pTOPS/8.2eTOPS) in a 15 or 28W TDP thermal configuration delivering up to 1.9x the GPU performance of the previous generation (Raptor Lake). The power consumption will also be lower thanks to Intel Core Ultra’s new Low-Power E-cores that are 30 to 50% more efficient than the E-cores in 13th gen Intel Core processors, and the faster GPU and built-in NPU will enable hardware-accelerated AV1 encoding/decoding and various devices leveraging AI such as portable medical ultrasound devices, industrial automation, autonomous driving, AI robots, and more. cExpress-MTL specifications: Meteor Lake-H/U SoC (one of the other) Intel Core Ultra 7 MS3 165H 16-core (6P+8E+2LPE) processor @ 1.4 / 5.0 GHz with 24MB cache, Intel […]

December 15, 2023December 14, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Renesas RA8D1 Arm Cortex-M85 SoC features LCD display interfaces, 2D graphics accelerator

Renesas RA8D1 is a new Arm Cortex-M85 microcontroller with graphics capabilities such as a 2D graphics accelerator and MIPI DSI and parallel RGB interfaces to connect an LCD that will make the chip suitable for HMI applications. Renesas introduced the world’s first Arm Cortex-M85 microcontroller with the RA8M1 just a few weeks ago, but the MCU has limited multimedia capabilities with just a 16-bit Capture Engine Unit (CEU) interface to connect a camera. The second member of the Renesas RA8 family fills this void with the RA8D1 microcontroller adding an LCD controller and a 2D graphics drawing engine on top of the CEU camera interface. Renesas RA8D1 specifications: MCU core – Arm Cortex-M85 clocked at 480 MHz with Helium MVE (M-Profile Vector Extension) with 32KB I/D caches, 12KB data flash Memory & Storage 1MB SRAM with TCM (128KB) 1MB to 2MB Flash memory 32-bit external SDRAM interface Display interfaces and […]

December 14, 2023February 4, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

GEEKOM Mini IT12 Core i7-12650H mini PC review – Part 1: unboxing, teardown, and first boot

GEEKOM Mini IT12 is a 12th Gen Intel mini PC offered with either an Intel Core i7-12650H or Intel Core i5-12450H Alder Lake processor, support for up to 64GB RAM, up to 2TB NVMe SDD, HDMI 2.0 video outputs and high-performance ports such as USB4 and 2.5GbE. The mini PC is also equipped with a WiFi 6E and Bluetooth 5.2 wireless module and comes preloaded with Windows 11 Pro operating system. GEEKOM has sent us a sample of the Mini IT12 with a 10-core Intel Core i7-12650H processor, 32GB DDR4, and a 1TB M.2 SSD for review. We’ll start the review by listing the specifications, before going and unboxing and a teardown, and finally boot the device to Windows 11 Pro. This will be followed by detailed reviews of the mini PC with Windows 11 and Ubuntu 22.04 in the next few weeks. GEEKOM Mini IT12 specifications SoC – Intel […]

December 14, 2023November 5, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Mixtile Core 3588E development kit review – Part 1: Unboxing and first boot

Mixtile Core 3588E is a Rockchip RK3588 SO-DIMM system-on-module with up to 32GB LPDDR4 and 256GB eMMC flash that follows NVIDIA Jetson Nano, TX2 NX, Xavier NX, and Orin Nano form factor and should work with any board made for Jetson SO-DIMM modules. We first covered the module last April, but Mixtile is now shipping their Rockchip RK3588 module and sent us a development kit with the Mixtile Core 3588 SoM fitted with a fansink and a carrier board that looks quite similar to the NVIDIA Jetson Nano developer kit we reviewed a few years ago, although its design is closer to the new B01 developer kit as we’ll see below. We’ll start the review with an unboxing and first boot, before testing it in more detail with Ubuntu 22.04 in the second part of the review. Mixtile Core 3588E development kit unboxing We received the development kit fully preassembled. […]

December 14, 2023December 14, 2023 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Lichee Console 4A RISC-V mini laptop sells for $252 and up

Sipeed Lichee Console 4A is a RISC-V portable Linux console, that I would also call a RISC-V mini laptop, powered by an Alibaba T-Head TH1520 quad-core C910 processor and equipped with up to 16GB RAM and 128GB eMMC flash. We first covered the device last August, but Sipeed had started taking pre-ordered by the end of October, and they’ve gone through the first batch of mass production, and should soon ship the mini laptops with the Aliexpress store showing December 31 as the release date, and we’re told some samples may have already been shipped in the first part of the month. Lichee Console 4A specifications: SoM – Replaceable Lichee LM4A system-on-module based on TH1520 quad-core RISC-V C910 processor with up to 16GB LPDDR4X, 128GB eMMC flash Storage – MicroSD card slot, M.2 SSD support Display – 7-inch 1280 x 800 LCD with capacitive touch Video Output – 1x mini […]

December 13, 2023December 15, 2023 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

$14 Pimoroni NVMe Base adds an M.2 PCIe socket underneath the Raspberry Pi 5 SBC

Pimonori has started to take pre-orders for the NVMe BASE add-on board that adds an M.2 PCIe socket underneath the Raspberry Pi 5 SBC with support for M.2 NVMe SSDs and M.2 AI accelerators with 2230, 2242, 2260, or 2280 sizes. It’s not the first M.2 expansion board for the Raspberry Pi as the PineBerry Pi HatDrive TM1 and BM1 add-on boards launched last month can also do that either on top of on the bottom of the Raspberry Pi, but the NVMe BASE is quite cheaper at just 13.50 GBP inc. VAT or $14.29 ex. VAT at the time of writing. NVMe Base key features and specifications: NVMe Base PCB M.2 M-key slot Holes for 2230, 2242, 2260, and 2280 sized M.2 modules Raspberry Pi FFC PCIe connector ‘PCIe Pipe’ Flat Flex Cable M2 bolt and 2x nuts for SSD mounting 4x 7mm M2.5 standoffs for base mounting 8x […]

December 13, 2023December 12, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

M5StickC PLUS2 IoT development kit features ESP32-PICO-V3-02 SiP, larger 200 mAh battery

M5Stack M5StickC PLUS2 is a battery-powered ESP32 IoT development kit with a 1.14-inch display, a built-in microphone, a 6-axis gyroscope and accelerometer, a few buttons, a buzzer, a Grove connector and a GPIO header for expansion. It builds upon the M5StickC Plus released in September 2020, but replaced the ESP-PICO-D4 SiP with an ESP32-PICO-V3-02 still based on ESP32 WiSoC but having 8MB SPI flash and 2MB flash and also features a larger 200 mAh battery along with a new CH9102 USB to TTL chip and does without a PMIC. M5StickC PLUS2 key features and specifications: ESP32-PICO-V3-02 SiP – Espressif Systems ESP32-PICO-V3-02 system-in-package with ESP32 dual-core WiFI and Bluetooth IoT processor @ up to 240 MHz, 8MB SPI flash, 2MB PSRAM Display – 1.14-inch Color TFT LCD with 135×240 resolution (ST7789v2 driver) Audio – SPM1423 microphone, buzzer USB – 1x USB-C port for power and programming using CH9102 USB to TTL chip […]

December 13, 2023February 7, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Maxtang MTN-FP750 (Ryzen 7 7735HS) mini PC review – Part1: Specs, unboxing, teardown, and first boot

Maxtang MTN-FP750, also known as NUC-7735HS-A16, is a mini PC powered by AMD Ryzen 7 7735HS (or Ryzen 5 6600H) CPU with up to 64GB of memory, up to 2TB M.2 NVMe SSD, and ports such as HDMI 2.0, USB4, 2.5GbE, etc… It also optionally supports WiFi 6E and Bluetooth 5.2, takes a 2.5-inch SSD via an FPC connector, and optionally comes with Windows 11 Pro operating system with the company saying the mini PC is ideal for office retail and digital signage. Maxtang sent us an MTN-FP750 mini PC sample for review with an AMD Ryzen 7 7735HS, 32GB DDR5, and a 512GB M.2 SSD preloaded with Windows 11 Pro. Today we will look at the specifications, go through an unboxing, teardown the device to check out the hardware design and boot it up to make sure it works as expected. We will then review Windows 11 Pro and […]