Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

September 2, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linaro 14.08 Release with Kernel 3.16 and Android 4.4.4

I’m a little late for that one, as Linaro 14.08 was released last Thursday. Nevertheless, this release features Linux kernel 3.16 (baseline), Linux 3.10.52 (LSK), and Android 4.4.4. As usual Linaro has worked on member hardware such as Qualcomm based IFC6410 and ARM Juno &Vexpress boards. They’ve also committed changes for LLVM, big Endian, and added a workload generator tool (rt-app) to the Ubuntu and Android image. This tool has been developed and used by the power management working group, presumably to measure and optimize power consumption under various loads. Here are the highlights of this release: Linux Linaro 3.16-2014.08 GATOR version 5.19 (new version) updated topic from Qualcomm LT (ifc6410 board support) updated Versatile Express ARM64 support (FVP Base and Foundation models, Juno) from ARM LT (Landing Team) updated Versatile Express patches from ARM LT updated LLVM topic (follows the community llvmlinux-latest branch) Big endian support (the 2014.05 topic […]

September 2, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

New Optimized Web Browser Released for the Raspberry Pi

If you’ve ever tried to use a Raspberry Pi to browse the web, you must have noticed how frustrating it can be due to the overall sluggishness of the system. But thanks to work by Collaborra, which optimized Epiphany Web browser for the Raspberry Pi, bringing features such as 720p HTML5 hardware video decoding (no flash support), faster loading and scrolling, etc.., the web browsing experience has much improved, although as you’ll see from the video below, it’s still not quite 100% perfect. The key modifications brought to Epiphany Web browser are listed below: More responsive UI and scrolling, even while loading a page Progressive tiled rendering for smoother scrolling Startup is three times faster Avoid useless image format conversions Better YouTube support, including on-demand load of embedded YouTube videos to make page load much faster Hardware decoding and scaling of videos (through gst-omx) Reduction of the number of memory […]

September 2, 2014September 7, 2022 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Banana Pi BPI-R1 Board Based on AllWinner A20 Features 5 Ethernet Ports, a SATA Interface, and More

SinoVoIP, a company known for its Banana Pi board and related spamming, has been working on another AllWinner A20 product called BPI-R1 (Banana Pi R1), a router/NAS platform that features 5 Gigabit Ethernet ports, a SATA interface, HDMI, audio output, and more. BPI-R1 Board specifications: SoC- Allwinner A20 dual core Cortex A7 processor @ 1 GHz with Mali-400MP2 GPU System Memory – 1 GB DDR3 Storage – SD card slot up to 64GB, SATA connector for hard drive or SSD up to 2TB Video output – HDMI, LVDS/RGB via DSI connectors Audio I/O – HDMI, 3.5mm stereo jack, and on-board microphone Camera – CSI connector possibly interfacing with their upcoming BPI-D1 camera Connectivity – 5x Gigabit Ethernet (RJ45) ports including 4x LAN ports, 1x WAN port, 802.11 b/g/n Wi-Fi (RTL8192CU module) with two antenna connectors. USB – 1x USB 2.0 port, 1x micro USB OTG port, 1x micro USB for […]

September 1, 2014September 1, 2014 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

MINIX NEO Z64 is an Intel Atom Z3735F Bay Trail mini PC Selling for $129

If you thought the upcoming ZBOX ZOTAC PI320 mini PC powered by Intel Bay-Trail-T Atom Z3735F quad core processor was nice and small (and powerful), but at $199, a little pricey, MINIX NEO Z64 may be what you are looking for. On On the outside, NEO Z64 looks very much like the company’s NEO X8 Android TV Box, but inside it’s powered by the same Z3735F processor with 2GB RAM, and 32GB eMMC, and it’s is expected to sell for just $129. MINIX NEO Z64 specifications: SoC – Intel Atom Z3735F “Bay Trail” quad core processor @ 1.33 GHz (Burst freq up to 1.83 GHz) and Intel HD Graphics System Memory – 2GB DDR3L Storage – 32GB eMMC flash + micro SD slot Connectivity – 10/100M Ethernet, Wi-Fi 802.11n + Bluetooth 4.0 Video Output – HDMI Audio Output – Analog Stereo output, HDMI USB – 2x USB 2.0 Misc – […]

September 1, 2014May 3, 2024 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

xWifi Open Source Hardware Wi-Fi Module and Dock for the Internet of Things (Crowdfunding)

For some reasons, Wi-Fi modules are pretty popular this year. After modules such as VoCore, AsiaRF AWM002, and ESP8266, here’s come xWifi. This module is based on Mediatek MT7681 SoC which includes a TCP/IP stack like Espressif ESP8622 or TI CC3300, so it won’t run OpenWRT like VoCore or AsiaRF modules. The module only consumes about 350mW during transfer, it will be open source hardware, and the xWifi module plus a dock with a 10A relay, a humidity and temperature sensor, and a LED will go for as low as $17. xWifi module only specifications: SoC – Mediatek MT7681 802.11 b/g/n SoC with 32-bit RISC CPU. Support for Client/softAP mode. Package size 5×5 mm Storage – 512KB SPI Flash (for firmware) I/Os via headers: UART and SPI interfaces. 5x GPIOs PWM Power – 3.3V, GND Power Consumption – ~70mA @ 5V (during RX active) Dimensions – 14 x 17 mm The […]

September 1, 2014 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

XBMC 13.2 Android and Source Code for Amlogic S802 Released

Based on comments on my M8 review post, many people have troubles with XBMC stability on this hardware, and the official XBMC 13.2 release can only be used on Android 4.2.2. But there’s hope, and maybe a solution to all these problems, as stane1983 has now released XBMC 13.2 for Amlogic S802 with backports from Kodi 14 alpha, that runs on Android 4.4.2. So if you have issues with XBMC in your Amlogic S802 Android TV box, you may want to download and install XBMC Gotham 13.2 (20140831_xbmcapp-stane.apk) from Stane1983’s download section. If you have an Amlogic device running Android 4.2.2, this won’t work due to differences with Amlogic’s libplayer header files, and you need to download and install mainline XBMC 13.2 instead. He’s also made all source available on his github account. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as […]

September 1, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Broadcom Introduces WICED Sense Bluetooth Low Energy Development Kit

Broadcom has recently announced a new development board for IoT applications using Bluetooth Low Energy (BLE) called WICED Sense. The kit consists of a “sense tag” powered by the company’s BCM20737S Bluetooth SIP Module with five micro-electromechanical sensors (MEMS), and Bluetooth 4.1 compatible WICED SMART software stack. The key features of WICED Sense devkit are as follows: Broadcom BCM20737 Bluetooth Smart system in package (SiP) module Five low-power MEMS sensors by ST Micro (part of the module): Gyroscope (L3GD20) Accelerometer (LIS3DSH) eCompass (LSM303D) Pressure sensor (LPS25H) Humidity Temperature sensor (HTS221) Bluetooth Smart connection covers distance of roughly 30 meters. USB – 1x micro USB connector to update applications Encryption, decryption, certificate signing, verification and various algorithms for increased privacy Secure Over-the-air (OTA) download capability to enable firmware updates from central device including smartphone, tablet and computers Misc – iBeacon, NFC, Wireless charging (Rezence A4WP) support. Power – Coin-cell battery The […]

August 31, 2014August 31, 2014 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Armada Mach 8 Pure Linux is a Quad Core XBMC Linux TV Box

Armada Mach 8 is an Amlogic S802 based TV Box apparently based on M8/EM8 hardware, but instead of running Android, it comes with XBMC Linux. It’s unlikely a quad core media player brings much performance over a dual core media player with XBMC Linux, but Amlogic S802 adds 4K video playback compared to Amlogic AML8726-MX. One of the main advantages of Linux compared to Android is support for automatic frame rate switching depending on the video you are watching (24Hz, 50Hz, 60Hz…), in order to avoid regular skipped frames when the video frame rate does not match the video output refresh rate. Let’s double check the specifications to confirm they are indeed the same as Shenzhen Tomato / Enybox M8, except possibly for Bluetooth: SoC – AMLogic S802 quad core Cortex A9r4 processor @ 2GHz with Mali‐450MP6 GPU @ 600Mhz System Memory – 2GB DDR3 Storage – 8GB NAND flash […]