Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

July 20, 2014 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

VolksPC mini PC runs Debian and Android Simultaneously Thanks to MicroXwin Framework

It’s been possible to run Linux or Android on ARM based board and producs for a while, with some firmware providing dual boot support, or even simultaneous use running a chroot with a VNC server and client combination. Some developers have come up MicroXwin, a X-windows implementation using a custom Xlib library that communicate directly with the graphics drivers, and not using a client/server implement. This provides much faster performance compare to X11, as shown on Raspberry Pi and Cubieboard2 development boards, and it has given them the ability to run Debian LXDE and Android Jelly Bean simultaneously on their upcoming VolksPC, a mini PC based on Rockchip RK3066 with 16GB flash. The first VolksPC will have the following specifications: SoC – Rockchip RK3066 dual core ARM Cortex A9 CPU @ 1.4Ghz with Mali-400MP4 GPU System Memory – 1 GB DDR3 Storage – 16 GB NAND flash + SD/MMC/MS card […]

July 19, 2014November 23, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

National Instruments Introduces NI sbRIO-9651 SoM Based on Xilinx Zynq SoC Running Linux Real-time OS

National Instruments has recently announced NI sbRIO-9651 System on Module (SoM) powered by Xilinx Zynq-7020 dual core Cortex A9 + FPGA SoC, based on LabVIEW RIO architecture used in products such as myRIO, and coming with a complete middleware solution as well as NI Linux Real-Time OS. NI sbRIO-9651 hardware specifications: SoC – Xilinx Zynq-7020 with two ARM Cortex-A9 cores @ 667MHz and Artix-7 FPGA with 85K Logic Cells System Memory – 512MB DRAM Storage – 512MB flash Dedicated processor I/O: Gigabit Ethernet USB 2.0 Host, USB 2.0 Host/Device RS232 (TX/RX) SHDC FPGA I/O: 160 single-ended FPGA I/O Configurable peripherals: Gigabit Ethernet, 3x RS232, 2x RS485, 2x CAN Power Consumption – 3 to 5 Watts (typical) Dimensions – 50.8 x 78.2 mm Temperature range – -40 to 85 °C NI SoM is said to integrate a validated board support package (BSP) and device drivers with the MI Linux Real-time OS. […]

July 19, 2014July 21, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

XBMC Linux (Beta) for SZ Tomato / Eny M8 Available for Download

SZ Tomato / Eny (E)M8 is an Android TV box powered by Amlogic S802 quad core processor, with 2GB RAM and 16 GB flash, but Stane1983 has been working on an XBMC Linux port for the device, and has released a beta version on Freaktab a few days ago. The firmware file (MX_LINUX-K200-update.zip) is available, and just need to be copied to an SD card to perform the update. The version is Gotham 13.1. This will completely replace you Android installation, and only works on M8 TV box, as the bootloader is not compatible with other S802 hardware, and the firmware only support AP6330 Wi-Fi module. If you decide not to keep using XBMC Linux, you can revert to Android, but reflashing the firmware via the SD card. This is a beta version, so expects some bugs. The list of known bugs is as follows: Bootlogo and splashscreens (booting up/shutting […]

July 19, 2014October 19, 2014 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

The World’s Cheapest Linux Computer? Pogoplug Mobile Now Sells for $7

Somebody asked “Anyone knows a computer cheaper than a Raspberry Pi with a network interface?” on Google+ mini PCs community. Some OpenWRT routers such as TPLink WR703N selling for about $20, or the VoCore Wi-Fi module selling for about the same price (Wi-Fi only) were parts of the answers, and I also mentioned some HDMI TV dongles that now sell for around $35, which is still a little cheaper than the Raspberry Pi model B when one considers shipping. But I found the answer by dhead666 particularly interesting: Pogoplug Mobile goes for 7$ on Amazon and that includes psu and network cable. It run Linux great (I’m using Arch) but you will want to have a ttl-usb cable and soldering iron available in case you manage to mess u-boot (go to the doozan’s forums for more info about the u-boot). Let’s have a look. Pogoplug Mobile is not a new […]

July 19, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Jolla Releases Sailfish OS Hardware Adaptation Development Kit for Android (CyanogenMod)

If you don’t quite have the spare cash to buy a Jolla Phone, or don’t own a Nexus 4, but still want to try Jolla’s Sailfish OS on your smartphone, here’s your chance, as Jolla has just released their “Sailfish OS Hardware Adaptation Development Kit”, which allows you to install Sailfish OS on any Android phone that supports CyanogenMod 10.1. The development kit is comprised of: Mer core – The Linux userspace core Android Hardware Adaptation (HA/HAL), consisting of: Device-specific Android Kernel Binary device drivers taken from an Android ROM (e.g. CyanogenMod) The libhybris interface built against the binary drivers Middleware packages depending on hardware-specific plugins A Qt/Wayland QPA plugin utilizing the Android hwcomposer Sailfish OS component You’ll a smartphone and a build machine matching the following hardware and software pre-requisites: Smartphone ARMv7 Android device officially supported by CyanogenMod 10.1.x Means to do backup and restore of the device contents […]

July 18, 2014September 10, 2014 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

Amlogic S802 TV Boxes Are Getting Cheaper: Meet $72 MX3 (M82) TV Box

When Android media players based on Amlogic S802 first launched a little over 3 months ago, they all sold for over $100. Since then various products have come to market, with prices slowly edging lower. But none comes as cheap as MX3 (aka M82), whose name is probably inspired from Gbox Midnight MX2, as it sells for $72.22 on GearBest including shipping. [Update: It can be found for $70 on DealExtreme] Let’s go through the specifications: SoC – AMLogic S802 quad core ARM Cortex A9r4 at 2.0GHz with ARM Mali-450MP6 GPU System Memory – 1GB DDR3 Storage – 4 GB NAND Flash + micro SD card slot Video and Audio Output – HDMI and AV Connectivity – 10/100M Ethernet, Wi-Fi 802.11 b/g/n, USB – 2x USB 2.0 host ports + micro USB OTG Misc – IR Sensor, Power LED, power button, and recovery/update switch via AV jack Power Supply – […]

July 18, 2014July 18, 2014 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

NEJE ZB01 Clone of Google Cardboard Virtual Reality Kit Sells for about $12

Can you remember Opendive, a low Cost DIY open source 3D virtual reality kit for smartphones? The kit can be built by anybody as long as you happen to own a 3D printer. But Google liked the concept, and at the latest Google I/O, the company designed the cardboard equivalent using the same lenses, and adding accessories namely a magnet, Velcro strips, and a rubber band to complete the kit. But some people saw a business opportunity here, and created NEJE ZB01, a nearly identical reproduction of the Google kit that can be bought for $12.66 on DealExtreme, instead of the $19.95 you’d have to pay for the original kit. The complete kit includes the cardboard, a rubber band, two magnets with 2cm diameter, two lenses with 2.3 cm diameter, and a pair of Velcro strips. It’s suppose to work with device using displays between 4″ and 7″ large. You’ll […]

July 17, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Onda V989 AllWinner A80 Android Tablet is Now Available for Pre-order

AllWinner A80 octa-core big.LITTLE has been delayed several times, but it appears products based on the latest AllWinner application processor can finally be pre-ordered. One of them is Onda V989, an Android 4.4 tablet with a 9.7″ 2048 x 1536 pixel display, 2GB RAM and 32GB flash, that’s supposed to reach over 48,000 in Antutu, but actually gets a little over 32,000 points in Antutu X. Onda V989 tablet specifications: SoC – AllWinner A80T octa core bit.LITTLE processor with 4x ARM Cortex A7 cores @ ?? GHz and 4x ARM Cortex A15 cores @ 2GHz, and PowerVR G6230 GPU System Memory – 2GB DDR3 Storage – 32GB NAND flash + micro SD/SDHC slot (up to 128GB) Display – 9.7″ IPS display with 10-point capacitive touchscreen, 2048 x 1536 resolution Video Output – micro HDMI (up to 1080p) Audio I/O – Stereo speakers, built-in microphone, 3.5mm earphone jack, and HDMI Connectivity […]