Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

July 29, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

TouchPico Android Projector Transforms Your Wall into a Touch enabled Display (Crowdfunding)

Android based projectors are nothing new, and I’ve covered a few with products such as Smartbeam, EPICT EPP-100, or Zeco CX5, but TouchPico brings something extra in that you can also tap on your wall with a stylus, in a similar way that you would tap on a tablet or smartphone with your finger or a capacitive stylus. It will also let you stream videos, display PowerPoint or Impress presentations, and anything else you can think of, on a display up to 80″ in size, and is portable with a built-in battery lasting up to two hours and a half. TouchPico hardware specifications listed in Indiegogo comments’ section: SoC – Dual core cortex A9 processor @ 1.6 GHz (Probably Rockhip RK3066) System Memory – 1GB RAM Storage – 4GB flash (no micro SD slot) Projector 0.3″ DLP; RGB LED; native resolution: 854 x 480; aspect ratio: 16:9 Contrast Ratio: 1000:1; .Throw Ratio: […]

July 29, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

AllWinner A33 Quad Core Tablets Are Now Available for $60 and Up

AllWinner A33 is a new quad core Cortex A7 processor pin-to-pin compatible will AllWinner A23 dual core processor, that costs less than $5 with the power management IC (AXP223). Tablets based on the new processor are now available for sale, and just as low as $60 including shipping on Aliexpress. All models currently listed feature 9″ to 10″ displays, so it’s safe to expect 7″ tablets to be close to $50. Let’s check the specs of one of the no-name 9″ tablets currently available: SoC – AllWinner A33 quad core Cortex A7 processor @ 1.3 GHz (Overclocked to 1.5GHz???) with Mali-400MP2 GPU System Memory – 512MB RAM Storage – 8GB NAND FLASH + microSD card slot (Up to 32GB) Display – 9″ capacitive touch screen (800 x 480 pixels, 5 points touch) Connectivity – 802.11 b/g/n Wi-Fi and Bluetooth. 3G is supported via external 3G USB dongle. Camera – 0.3M […]

July 29, 2014July 29, 2014 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Hardkernel Unveils $30 Raspberry Pi Compatible Module with RTC, ADC, and LiPo Battery Support

Hardkernel is better know for its ODROID boards powered by Samsung Exynos SoC. So I was surprised to discover ODROID-W, “a miniature computing module which is fully compatible with all software available for the Raspberry-Pi”. Software compatible, really? Yes, because they used the same Broadcom BCM2835 SoC found in the Raspberry Pi, packaged it in a smaller form factor, while keeping HDMI, USB, and CSI interface, and expansion headers, and all that for $30, plus just $9 for shipping. Let’s go through ODROID-W specifications first: SoC – Broadcom BCM2835 ARM1176JZ-F processor @ 700 Mhz with VideoCore IV GPU System Memory – 512MB LPDDR2 (Samsung K4P4G324EB PoP) Storage – microSD slot + eMMC socket (bottom of the board) Video Output – micro HDMI (with NXP IP4791CZ12 protection IC) USB – micro USB connector, and USB host (not soldered) Expansion Headers: R-Pi compatible 26-pin expansion header (through holes) R-Pi compatible 15-pin CSI […]

July 29, 2014July 29, 2014 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

APK Downloader Retrieves an App APK with its Google Play Link

Let’s assume you are unlucky, and frequently end up with Google Play saying “Sorry, this app is not compatible with your device”. The usual way is either to patiently wait for a new firmware, or actually go through Android configuration files to change the behavior by, for instance, emulation a “Samsung Galaxy S4”. It’s also possible you somehow ended up with a device without Google Play. There’s now another solution thanks to APK Downloader. The way it works is that you just go to APK Downloader website, look for the app in Google Play website in your PC or device, copy the URL to APK Downloader website, and click on “Generate Download Click”. After a few seconds, or minutes depending on the APK size you’ll be able to download the APK. I used Antutu for testing as shown in the screenshot above. There’s a total limit of 250 new cached […]

July 28, 2014July 29, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Skytecx SK-R68b Android TV Box Comes with Three Wi-Fi Antennas

There’s now a pretty long list of Android media players powered by Rockchip RK3288, and they keep coming up. While I don’t cover most of them, Skytecx SK-R68b is a little more interesting because for some reasons, the manufacturer has decided to go with not only two, but three Wi-Fi antennas, and the product is the type that you place directly on top of your TV. The rest of the specifications looks pretty standard: SoC – Rockchip RK3288 quad core CortexA17 @ 1.8 GHz with ARM Mali-T764 GPU System Memory – 2GB DDR3 Storage – 8 to 32GB NAND flash (8GB by default) + micro SD card slot (up to 32 GB) Connectivity – Gigabit Ethernet, dual band WiFi 802.11 b/g/n (2.4GHz/5GHz) and 802.11 a/c with triple Wi-Fi antennas, and Bluetooth 4.0 Video & Audio Output – HDMI 2.0 output (female) up to 1080p (sic), AV output (3.5mm jack) Video Codecs […]

July 28, 2014July 28, 2014 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Kankun KK-SP3 Wi-Fi Smart Socket Hacked, Based on Atheros AR9331, Running OpenWRT

Kankun KK-SP3 is a $20 Wi-Fi smart socket that can be controlled via iOS and Android app. But one person created a Kankun community on Google+ to try to hack the device and control it from a PC, or from outside the home network for example. Up to now, the device has been opened, found to run OpenWRT, and one the member wrote a Windows app to control the socket from a PC. It is a basic smart socket, without power monitoring capabilities, and unless you start hacking the hardware, all you can do is basically turn it on and off. The device is based on Qualcomm Atheros AR9931, found in many low cost routers supporting OpenWRT, and the socket indeed runs OpenWRT, which you can access via SSH or Telnet (username/password: root/admin). There’s 32MB RAM (Winbond W9425G6JH), and a 10A OMRON relay. The smart socket actually communicates with the […]

July 28, 2014July 28, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Rockchip RK3288 Beta Firmware Release for Unnamed Android TV Box

The whole activity around the upcoming media players based on Rockchip RK3288 is pretty interesting, or some would say amusing. First, many companies started to release pictures of their boards a few months before their products are actually ready, and now we’ve got a beta Android 4.4 firmware for Rockchip RK3288 for an unknown TV box released via Geekbuying Blog. I’ve read rumors about a Tronsmart Orion R28, so it might be that one, but who knows. Before investigating the content of the firmware, here are the features that we know about the hardware: Based on Rockchip RK3288 quad core Cortex A17 processor System Memory – 2GB RAM (Samsung) Storage – 8GB flash (Kingston) Wi-Fi – AP6330 Wi-fi module The firmware is based on Linux 3.10, the build number is rk3288-eng 4.4.2 KOT49H eng.ant.20140721.164453 test-keys, and the software version RK3288_R_BOX_Android 4.4.2-SDK_v1.0.0_140613. Most people won’t need this, but if developers want […]

July 28, 2014July 28, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

MPL CEC10 Compact Embedded Computers Feature Bay Trail SoCs, 5 Gigabit Ports, Rugged Enclosures

MPL, a company specializing in industrial PCs based in Switzerland, has recently announced their CEC10 series “Compact Embedded Computer” featuring Intel Bay Trail-I E3800 processors, with 5 Gigabit Ethernet ports using RJ45, M12, or SFP connectors, and supporting industrial and extended temperature ranges, and as well as various rugged housings. Specifications for MPL CEC10: SoC – Intel Atom E3800 series single, dual, or quad processor @ up to 1.91GHz with Intel HD graphics. System Memory – up to 4GB DDR3L ECC-RAM Storage: mSATA interface Optional 2.5-inch SATA HDD/SSD Optional eMMC flash (soldered) Video Output- DisplayPort, optional eDP / VGA Connectivity – 5x gigabit Ethernet ports. RJ45 connectors by default, but the system also supports M12 connectors or SFP cages. USB – 1x USB 3.0 host port, 1x USB 3.0 device port, 2x USB 2.0 ports Serial – 1x RS-232 port, optional RS-232/422/485 or extra RS-232 port Expansion Slots: Mini-PCIe slot […]