I don’t have one, but eight boards to give away to four winners (2 each) with Espressif Systems ESP32 PICO Kit v3 board based on ESP32-PICO-D4 SIP, an all-in one package with ESP32, 4MB SPI flash, crystal oscillator, and passive components, which allows for smaller boards.
The board is very similar to any other ESP32 boards, and software compatible, but it’s just quite thinner, and easier to work with on breadboards. Since I had already played with Arduino Core and Espruino (JavaScript) on other boards, I used one of the 10 boards provided by Espressif to play with Micropyhon on ESP32.
Each winner will get two ESP32 PICO Core board in order to make it worthwhile with regards to shipping costs.
To enter the draw simply leave a comment below. Other rules are as follows:
- Only one entry per contest. I will filter out entries with the same IP and/or email address.
- Contests are open for 48 hours starting at 10am (Bangkok time) every day. Comments will be closed after 48 hours.
- Winners will be selected with random.org, and announced in the comments section of each giveaway.
- I’ll contact the winners by email, and I’ll expect an answer within 24 hours, or I’ll pick another winner.
- Shipping
- $4 for registered airmail small packet for oversea shipping payable via Paypal within 48 hours once the contest (for a given product) is complete.
- If Paypal is not available in your country, you can still play, and I’ll cover the cost of sending the parcel by Sea and Land (SAL) without registration if you win.
- I’ll post all 10 prizes at the same time, around the 8th of November
- I’ll make sure we have 10 different winners, so if you have already won a device during this giveaway week, I’ll draw another person.
Good luck!
The boards above are not for sale yet, but the similar ESP32-PICO motherboard is sold for $16 on Tindie. Alternatively, you could contact Espressif Systems, if you are interested in getting ESP32 PICO Core samples.
Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.
Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress
Good Luck Everybody (=
I enjoy your blog – keep it up.
I hope I win this time.
I love reading your updates daily. Keep up the great work. Looking forward to many more articles.
Count me in!
Count me in !!!
Thanks
Count me in !
In!
I especially like the breadboard-friendly narrowness.
nice
I’m in.
These would be great for some home automation projects!
Good.
can’t say no
Ok
Thanks again!
Am I too late?
I’m in 🙂
Hope i Win
Best wishes to all!
i’m in
I love all ESP32 for IOT. I agree very much your Post.
Thanks!!
Count me in !!!
Count me in. Thanks!
Big fan of the blog!
Would really like to win this 🙂
Thanks for the invite
I want one!!
Thanks
Let’s go
Nice! Count me in also!
I’m in!
Thank you for this opportunity to win.
Why not
These boards look fantastic!
I have a few Arduino projects that I’ve been looking to switch to ESP32 and these boards are just perfect.
ESP32 rules
Great Blog!! I am in.
I’m in!
Lets try..!!
Great idea!
Count me in!
Count on me to participate
I want to participate
I’m in
HI, I would like to get one ESP32 kit. You make good work.
I could finish an interesting non-profit social project using these.
It seems many people are moving to ESP32, but in my opinion this is quite disputable solution. ADC problems, no full SDK support of hardware. No proper IDE with debugger etc.
Yes please!
I’m in!
Me too!
With these boards, I could upgrade some projects based on esp8266.
Cool! Count me in 😉
I’ll take these two.
I want!
Nice board!
Ohh that looks good, would love to get to play with that board.
That’s nice, count me in !
I want it!
Those boards look nice!
Another great product for us to try. Thanks in advance!!!
I want to build gas meter reader. It would be nice base for this.
I need them sincerely to experiment.
Hope I’ll be one of them to win
ESP32 is a great platform I wanted to work on.
Nice board
.
count me in
Count me in 🙂
week
Want it.
Would be great to get my hands on an ESP32- count me in 🙂
Hope dies last. I never win stuff.
Great compact little board!
I like your blog.
I’m in also, thanks
I look forward to trying these out!
I’m in!
Thank you
Let’s have a try shall we
🙂
Yes please!
Looks like an interesting little board for prototyping.
I’m in!
beaker: mememememememe
I’m in
Nice boards
=D
great!
I am very unlucky
I want it!
Nice one!
There’s a lot more lurkers here thatn I would have though. That’s great news. I saw a review of these boards and was pretty impressed. *cross fingers*
Maybe this time I will be the lucky one?
It would be nice to finally compare ESP32 to ESP8266 🙂
Thanks
Hope I win!
More boards!
Great
I want some 🙂
Thanks
Yes, please.
Good luck guys, I hope I win 😛
I’m in
Me too!
I’m in!
Me tooooo.. 🙂
I love it
I’m in
I’m in
Oh, I have not tried yet the ESP32.
Thanks.
Me too!
more and more esp32 boards… neat
Hi, can I win it? 🙂
I’m in!)
me too
I am in!
Let’s try out my luck 🙂
Need one to play with!
Here I am!
me too!
Good luck!
Good luck everyone! 🙂
Will try.
Count me in !!!
Thanks
Since I do things ESP32-ish…count me in. 😀
I wish to be one of the winners …
I’m in!
Too sweet! Thanks!
Nice, I’ve been wanting to play with the ESP32.
Woohoo!
Oh, you’re having giveaways now! Awesome! ?
Cool board. Now i’m developing system for remote controlling of heating car (like in north countries). And ESP32 could be like server for lot of node’s.
Looking forward to the public release!
I’ll give this a shot
+1
Count me in!
Yatzeee
I’m in.
Would be great to test one.
Please i want it too, thanks
already like them 🙂
If you’re not in you can’t win 😉
+1
Good luck everyone!
I hope there will be some modules, smaller than ESP-WROOM32, based on ESP32-PICO-D4 SIP, for easy soldering, but not in breadboard format.
In.
micropython FTW
count me in
I’ll win
+1
Giving away two per winner is a good plan.
usefull piece
I’m in.
Great!
Maybe I’ll touch ESP32 :]
Would be good try the ESP32
Good luck nerds! 🙂
Count me in.
Can I haz esp32 pico core plz?
It’d be sweet 😀
In.
I’m in for this one too
esp32 4ever!!
I need one.
I’m in, thanks
I’m In…
Thanks
ESP32 for me!
Count me in this drawing, Thank you very much!
Me me me. Let it be me.
Thank your for this giveaway.
I’m in again!
Another great giveaway. Thanks so much!
hmmmm…. looks like a nice board.
Nice !
In!
Thanks for the chance!
Give us more ! Good luck everyone.
Count me in.
Thanks for creating this giveaway! Good luck everybody
Good luck ! 🙂
Nice board to prototype
CNX is awesome!
I’m in.
I’m in.
Thank you for having this drawing. I read your website every day.
Cool!
Neat!
Me too thanks!
i want one.
Count me in
i win :p
Thank you for the giveaway
Please count me in.
Thanks,
Raju
I like these giveaways
Yes pls.
Good luck everyone
Please, count me in.
I’m in
Hardware to be eXpressif with! I like this!
I’m in, thanks.
Liked the slim breadboard version. After working with 8266, ESP32 is the way to go.
Very nice 🙂
esp32 is the Device!
I’m in, thanks.
I’m in
Hi
Please add me too.
Yes 🙂
I want those boards
Count me in
Thank you very much and good look everybody!!!
Good luck everyone
CNXSoft rules!
Nice boards, even outside of the giveaway^^ Those slim form factors are great for prototyping.
love it
I’m in, good luck all!
Me too. Your site is great.
I’m in, thanks CNXSoft!
I’m in
Me!
I’m in
Super cool board, give. 🙂
cheers
May be 🙂
Neat! I want one!
I need this for magical experiment ??♀️
Nice to see a thinner board for breadboard use.
Good luck to All of you
Good luck to All
I’m in!! :O
I want one .. from Colombia 🙂
Good luck to All of you
awesome!!
Count me in!
I’m in!!
Thanks
I want it 🙂
I’d like to join this raffle!
And thanks for your generosity, it’s very much appreciated!
Good luck
in4one
Hi 😉 nice
Thanks
Sounds great, would be nice to try them out! Good luck to everyone.
Thank you for all the good work. (and I hope I win)
I’m in!
I’m in – they look great!
That was a popular contest with 239 entries. Now the fun begins as Mr Random has to select 4 winners: Winner 1: 122 -> Nobody of Import Winner 2: 204 -> Andrius Kurtinaitis Winner 3: 17 -> Kebab Winner 4: 218 -> renw0rp Two winners did not reply in time, so I have to draw again: Winner 1(a): #236 -> BobR (re-instated to to miscommunication. Sent: 1x ESP32 PICO Kit + LinkIt Smart 7688 Duo) Winner 4: #95 -> Zoobab Still looking for one more winner, so one more draw: Winner 1: #112 -> Sollie Congratulations to all winners, emails… Read more »