Inkplate 6 MOTION STM32-powered wireless e-paper display offers higher resolution and faster refresh rates (Crowdfunding)

The Inkplate 6 MOTION is a new product from Soldered Electronics in their Inkplate series of wireless e-paper displays. It is a 6-inch e-paper display with a partial refresh rate of 11fps which reduces obvious latency in rendering dynamic content such as videos, animations, and scrolling text.Inkplate 6 MOTION with enclosure

The display is driven by an STMicroelectronics dual-core STM32H743 microcontroller, with an ESP32-C3 as a secondary processor. It features Wi-Fi and Bluetooth for networking and a host of peripheral interfaces for physical connectivity. It includes several sensors such as a rotary encoder for quick navigation, a gravitational accelerometer with a gyroscope for tracking device orientation, and a motion detection sensor.

We covered the original Inkplate 6 display when it launched on Crowd Supply in 2019. The Inkplate 6 is much less expensive than the new model but has a lower screen resolution (800 x 600 px) and slower refresh rates (256ms). Furthermore, it lacks the sensors on the Inkplate 6 MOTION.

The Inkplate 6 MOTION display is a 1024 x 768px screen with speedy refresh rates and is therefore ideal for dynamic e-paper projects such as information panels, a mounted frame for digital art, a minimalist typewriter, or an e-reader.

Inkplate 6 MOTION PCB

Inkplate 6 specifications:

  • Microcontroller – STMicroelectronics STM32H743ZIT6
  • Co-controller – ESP32-C3 WiFi and BLE SoC
  • RAM – 2MB RAM, 32 MB external DRAM (W9825G6KH-6)
  • Storage – 1MB flash memory, microSD card slot
  • Screen
    • Size – 6”
    • Resolution – 1024 x 758 pixels
    • Active Area – 90.6 x 122.4 mm
    • Pixel Density – 212 ppi
    • Modes – Black & white, or 4-bit greyscale
    • Colors – Black, white, and 14 shades of grey
    • Partial refresh – Supported for black & white and 4-bit greyscale modes
    • Partial refresh time – 91 ms
    • Full refresh time – 500ms (black & white), 800ms (greyscale)
  • Connectivity
    • Network – Wi-Fi and Bluetooth via ESP32-C3
    • USB – USB-C (USB to UART via CH340C chip) for programming, power, and charging battery
    • easy-C Ecosystem connector
    • GPIO – 30+ pins for Ethernet, USB OTH, I²S, SDMMC, I²C, SPI, UART, and other protocols
  • Power
    • Input – 5 V (USB Type-C) or 3.7 V (Li-ion battery)
    • Li-ion charger – Microchip MCP73831 linear charge management controller with LED indicator
    • E-paper PMIC – Texas Instruments TPS651851RSL
    • Current Draw –  22 μA
  • Sensors
    • STMicroelectronics LSM6DSO32 accelerometer and gyroscope module
    • STHC3 temperature and humidity sensor
    • Front-facing sensor – Broadcom APDS-9960 for proximity, gesture, and color detection
  • Misc – 3x user buttons, 2x WS2812B LED, PCAL6416A GPIO expander
  • Board Dimensions – 144 x 108 mm
  • Enclosure Dimensions – 161 x 116 x 15 mm

The device is easy to program by plugging it into a computer with a USB-C cable, connecting it to a Wi-Fi or Bluetooth network, and uploading a few lines of code. The Inkplate 6 MOTION is compatible with popular, open-source development tools such as Arduino IDE, MicroPython, Adafruit GFX, Home Assistant, and ESPHome.

Similar to the older models in the Inkplate family, the Inkplate 6 MOTION e-paper display itself is open-source, hardware and software. The Inkplate 6 MOTION’s Arduino library, MicroPython library, and hardware files are hosted on GitHub. Documentation is accessible via a Read The Docs website for the Inkplate family.

The Inkplate 6 MOTION recently launched on Crowd Supply, with a $10,000 funding goal (surpassed at the time of writing). The display itself is priced at $169. You can get the display with an enclosure for $189 or with an enclosure and a pre-installed battery for $199. here is free shipping within the United States while a $12 shipping fee applies to the rest of the world. All orders are expected to ship by September 19, 2024.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK 5 ITX RK3588 mini-ITX motherboard
Subscribe
Notify of
guest
The comment form collects your name, email and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.
3 Comments
oldest
newest
urostor
urostor
4 months ago

Who needs a high refresh rate on an e-paper display? It defeats its purpose and looks awful. But somehow it became a metric by which manufacturers compete.

RK
RK
4 months ago

> Who needs a high refresh rate on an e-paper display?

It’s nice for scrolling through epubs, browsing and typing. The Modos paper monitor presentation (also foss: https://gitlab.com/zephray/glider) gives a few examples: https://www.youtube.com/watch?v=pXn-bAwzNv4

> But somehow it became a metric by which manufacturers compete.

High-refresh rate EPDs last longer and leave less ghosting when driven slow and high bit rate for ebook reading as well so it’s a good indicators for quality.

Anonymous
Anonymous
4 months ago

Please approve my previous comment and delete this one. Thanks.

Khadas VIM4 SBC