Posted on

Juno Tab 3 is a pricey 12.1-inch Linux tablet powered by an Intel Processor N100 CPU

Juno Tab 3 is a rare Linux tablet running Mobian Phosh, Ubuntu, or Kubuntu on an Intel Processor N100 quad-core Alder Lake-N processor and equipped with a 12.1-inch touchscreen display with 2160×1440 resolution. We’ve covered many Intel N100 hardware platforms, mostly mini PCs, and the closest thing to a tablet was the Higole F9B Pro mini PC with a 7-inch touchscreen display and a 26mm thick design. The Juno Tab 3 is a proper Linux tablet with an Intel N100 CPU, 12 GB RAM, 512GB SSD, and a 12.1-inch touchscreen display in an 8.7mm thin design. Juno Tab 3 specifications: SoC – SoC – Intel Processor N100 quad-core Alder Lake-N processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ 750 MHz; TDP: 6W System Memory – 12GB LPDDR5 4,800MT/s Storage 512GB, 1TB, or 2TB M.2 SATA 2242 SSD MicroSD card reader Display – 12.1-inch […]

Posted on

$999 Librem 11 Linux tablet features Celeron N5100 processor, 1TB NVMe SSD, 2.5K AMOLED display

Purism Librem 11 is an 11.5-inch Linux tablet running the secure PureBoot bootloader and PureOS Linux distribution with a focus on privacy and respect for personal freedom. The tablet comes with what looks to be a decent 11.5-inch AMOLED touchscreen display with a 2560×1600 resolution, 8GB RAM, and a 1TB NVMe SSD, but the Intel Celeron N5100 quad-core Jasper Lake processor would be considered entry-level in 2023. The tablet also comes with a keyboard and stylus making a 2-in1 hybrid device. Purism Librem 11 specifications: SoC – Intel Celeron N5100 quad-core Jasper Lake processor @ 1.1GHz/2.89GHz (Turbo) with Intel UHD Graphics System Memory – 8 GB LPDDR4 (soldered) Storage 1 TB NVMe SSD (Kingston KC3000) microSD card reader implemented with Genesys Logic GL823K Display – 11.5-inch AMOLED display with 2560×1600 resolution, 60Hz refresh rate, Goodix GXTP7380 multitouch digitizer, stylus support Stylus – 2x buttons, 4096 pressure levels, tilt support (XY), […]

ArmSoM CM5 - Raspberry Pi CM4 alternative with Rockchip RK3576 SoC
Posted on

PineTab2 Linux tablet to feature Rockchip RK3566 SoC, up to 8GB RAM, 128GB eMMC flash

The PineTab2 is an upcoming 10.1-inch Linux tablet based on the 1.8 GHz Rockchip RK3566 quad-core Cortex-A55 processor and equipped with up to 8GB RAM and 128GB eMMC flash. The new model is a clear step-up compared to the Allwinner A64-based PineTab which did not survive the supply shortage and has also gone through a complete physical redesign with a modular metal chassis that is easy to disassemble for upgrades and change parts such as the eMMC module, camera module,  battery, or even the display. PineTab2 preliminary specifications: SoC – SoC – Rockchip RK3566 quad-core Arm Cortex-A55 @ up to 1.8 GHz with ARM Mali-G52 2EE GPU supporting OpenGL ES 1.1/2.0/3.2. OpenCL 2.0. Vulkan 1.1, 0.8 TOPS NPU System & Storage Option 1 – 4GB RAM, 64GB eMMC flash module Option 2 – 8GB RAM, 128GB eMMC flash module MicroSD card slot Display – 10.1-inch IPS display (other details TBC) […]

Posted on

PineTab 10.1″ Linux tablet Launched for $99.99 with UBPorts OS

As expected, Pine64 PineTab Linux tablet with Allwinner A64 processor, 2GB RAM, and a 10.1″ touchscreen display has just launched for $99.99 or $119.98 with a detachable backlit keyboard on Pine64 Store. Note those are pre-orders with shipping scheduled for the end of July. PineTab won’t shatter performance records with a quad-core Cortex-A53 processor with Mali-400MP GPU, 2GB RAM, 64GB eMMC flash, but it’s one of the rare Linux tablets on the market, and certainly the most affordable. The tablet offers a decent set of features too with a 10.1″ 720p capacitive display support for M.2 SATA SSD, Mini HDMI output, front-facing, and rear cameras, built-in WiFi and optional 4G LTE via the M.2 socket. It also comes with a 6,000 mAh battery that should be good for many hours. PineTab also leverages all the software work done since the launch of Pine A64 board in 2016 including mainline U-boot […]

Posted on

PineTab Linux Tablet Coming Soon for $100. Watch an Ubuntu Touch Demo in the Meantime

People have been trying to launch Linux tablets for years from PenPod 700 to Jolla Tablet, or more recently NTablet. You may not know or remember about those, as Linux tablets that actually shipped never really gained traction. But in early 2019, Pine64 started to mention development work on PineTab, an Allwinner A64 powered BSD/Linux tablet, and the company/community is really good at developing low-cost hardware and providing decent firmware support, so hopes were high. After COVID-19 related delay, Pine64 has now announced the first PineTab tablets would go for pre-order at the end of the month for $99. PineTab specifications: SoC – Allwinner A64 quad-core Cortex-A53 processor with Arm Mali-400 MP2 GPU System Memory – 2GB LPDDR3 RAM Storage – 64GB eMMC flash, MicroSD card slot, M.2 slot for SATA SSD Display – 10″ MiPi 720p Capacitive LCD Video output – Mini HDMI up to 4K @ 30 Hz […]

Posted on

Ntablet Android & Linux Tablet Features a Replaceable RK3288 CPU Module, GPIO Board

Most tablets on the market either run Android or Windows, and while some have tried to launch Linux tablets, none of the products have really caught on, although the upcoming PINETAB might change that. Another option might be Ntablet 7″ tablet that runs either Android, Debian or WebOS Linux operating systems, but also offers some innovative features such as a replaceable Rockchip RK3288 CPU module, and an external GPIO board for makers. Ntablet hardware specifications: SoC – Rockchip RK3288 quad-core Cortex-A17 processor @ 1.8 GHz with Mali-T760 quad-core GPU System Memory – 2GB LPDDR3 Storage – 16GB eMMC flash, MicroSD card slot up to 32GB Display – 7″ touchscreen IPS display with 1920×1200 resolution Video Output – Micro HDMI port Audio – 3.5mm headphone jack Camera – 5MP front-facing camera (OV5648 sensor) Connectivity – 802.11b/g/n/ac WiFi 5 and Bluetooth 4.0 via Ampak AP6255 module USB – 1x USB 2.0 port, […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on

TableX Arm Linux Tablet Runs Armbian Ubuntu, To Launch for 89 Euros

If you want an Arm Linux laptop, you have already some choices with products such as Pine64 Pinebook,  or Olimex TERES-I open source hardware laptop,  but if instead you’d rather do without keyboard, and get an Arm Linux tablet, choices are much more limited, if any at all. Back in 2012, Allwinner A10 based PengPod 700 & 1000 tablets were available for the company has since folded, and this year, RasPad case launched to allow you to build your own thick tablet with a Raspberry Pi 3 (B+). However, if you want to normal looking tablet, your best option right now is to get an Android tablet and mess around to install Linux on it. That’s not for everyone, and the good news is that what looks like a proper – albeit low-end – Arm Linux tablet is coming to market soon with TableX. TableX preliminary hardware specifications: SoC – […]

Posted on

PengPod 700 Linux Tablet Used As a 3D Printer Touchscreen Controller

PengPod 700 & 1000 are two of the rare Linux tablets to be available on the market. Those tablets are based on AllWinner A10 SoC which can support both Android and Linux thanks to independent developers. After a successful Indiegogo campaign, where they managed to received pledges for a few hundred units of both model, people started to receive their Linux tablets earlier this year. Francesco Santini decided to purchase PengPod 700 in order to use it as an touchscreen controller for his 3D printer (Solidoodle). He modified Pronterface, a graphical user interface written in Python to control 3D printer, for the 7″ display the of PengPod tablet, and made the change available in his github account https://github.com/fsantini/Printrun-pengpod700. He uses a SAMBA share to copy G-code files (“G-code is the common name for the most widely used numerical control (NC) programming language”), and load the required file from the PengPod […]

Boardcon Rockchip and Allwinner SoM and SBC products