ADLINK OSM-MTK510 is an OSM Size-L compliant module powered by a MediaTek Genio 510 hexa-core Arm Cortex-A78/A55 SoC with a 3.2 TOPS AI accelerator and equipped with up to 8GB LPDDR4 and 128GB eMMC flash.
The OSM module supports HDMI 2.0, MIPI DSI, and eDP display interfaces, up to 30MP cameras, and I/O options such as gigabit Ethernet, USB 3.0, and PCIe Gen2 x1. The OSM-MTK512 is available in either commercial or industrial (-40°C to 85°C) temperature grades and the company offers at least a 10-year lifecycle for long-term use.
ADLINK OSM-MTK510 specifications:
- SoC – MediaTek Genio 510 (MT8370)
- CPU – Hexa-core processor with 2x Cortex-A78 cores @ up to 2.2 GHz and 4x Cortex-A55 cores @ up to 2.0 GHz
- GPU – Arm Mali-G57 MC2 GPU
- VPU for visual processing
- Encoding up to 4Kp30 with H.265/HEVC or H.264
- Decoding up to 4Kp60, AV1, VP9, HEVC, H.264 codecs supported
- AI accelerator – Mediatek DLA + Ethos U-VP6 with INT8, INT16, FP16 support, up to 3.2 TOPS
- DSP – Tensilica HiFi5 audio DSP
- System Memory – 2GB, 4GB, or 8GB LPDDR4L
- Storage
- 32, 64, or 128 GB eMMC flash
- Optional SPI NOR flash
- 662 contacts to carrier board with
- Storage – 2x SDIO (4-bit), compatible with SD/SDIO standard, up to version 3.0
- Display Interfaces
- HDMI 2.0a
- 4-lane MIPI DSI
- eDP (Note: 18-/24-bit dual-channel LVDS is also listed in the specs, but not in the summary and block diagram)
- Camera – MIPI CSI RX Interface
- Compatible with the MIPI Alliance Interface Specification v1.0
- Up to 4 data lanes, with a maximum data rate of 1.0 Gbps per lane
- Supports MIPI-HS, MIPI-LP modes
- Audio
- 2x I2S interfaces with audio resolution from 16-bits to 32-bits and sample rate up to 192kHz
- I2S audio codec (located on the carrier)
- Networking – Gigabit Ethernet
- USB – 1x USB 3.0, 2x USB 2.0
- PCIe – PCIe Gen2 x1 (TBC)
- Low-speed I/Os
- 4x UART interfaces (UART A has TX/RX/CTS/RTS)
- 3x SPI interfaces
- 3x I2C interfaces
- 17x GPIO with interrupts
- Security (as part of SoC)
- Resource Domain Controller (RDC) supports 4 domains and up to 8 regions of DDR
- Arm TrustZone (TZ) architecture
- On-chip RAM (OCRAM) secure region protection using OCRAM controller
- High Assurance Boot (HAB)
- Cryptographic Acceleration and Assurance Module (CAAM)
- Capable to support Widevine and PlayReady content protection
- Public Key Cryptography (PKHA) with RSA and Elliptic Curve (ECC) algorithms
- Real-time Integrity Checker (RTIC)
- DRM support for RSA, AES, 3DES, DES
- Side-channel attack resistance
- True random number generation (RNG)
- Manufacturing protection support / Secure Non-Volatile Storage (SNVS)
- Supply Voltage – 5V DC +/-5%
- Power Consumption – Under 5W
- Dimensions – 45×45 mm (SGET OSM Size-L form factor)
- Temperature Range
- Standard – 0°C to +60°C
- Rugged – -40°C to +85°C (optional)
- Humidity
- 5-90% RH operating, non-condensing
- 5-95% RH storage (and operating with conformal coating)
- Shock and Vibration
- IEC 60068-2-64 and IEC-60068-2-27
- MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D
- HALT – Thermal Stress, Vibration Stress, Thermal Shock, and Combined Test
I understand the red cross in the block diagram above are pads designed in the OSM Size-L standard, but not available on the MediaTek Genio 510 SoC and by extension to the OSM-MTK510 system-on-module. While Size-L is the largest OSM module, it’s still fairly small at just 45x45mm.
ADLINK provides a Yocto Linux BSP by default, and Android can be supported on request. Extended support is provided through Foundries.IO Linux microPlatform (LMP) based on OpenEmbedded and the Yocto Project. The company did not mention any evaluation carrier board for the OSM-MTK510, but I can see they have an upcoming OSM devkit for the OSM-IMX93 Size-L module, so they might potentially use the same carrier board with the MediaTek Genio 510 module.
While the press release announce the “launch” of the OSM-MTK510 module, the product page mentions the information is only preliminary, and I indeed spotted a few mistakes here and there. I’d assume the module might not be available right now, but should be in a few months. There are two standard SKUs:
- OSM-MTK510-2G-32G-CTOSM Size-L module with Genio 510 SOC, NPU, 2 GB LPDDR4, 32 GB eMMC, 0°C to 70°C
- OSM-MTK510-4G-32G-EROSM Size-L module with Genio 510 SOC, NPU, 4 GB LPDDR4, 32 GB eMMC, -40°C to 85°
Other variants would have to be built upon request further increasing the lead time.
Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.
Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress
