My Nextion Enhanced NX8048K070 display will soon find a new home. The 7″ display comes with a capacitive touchscreen, an enclosure, and can work in standalone mode thanks to a built-in processor and a 8-pin FPC connector for I/Os, or connected to a micro-controller through a UART interface.
I did a mini review of the display, mostly showing a teardown, and how to use Nextion Display Editor Windows-only tool to design your own user interface. The GPIOs are not really convenient to use with the required flat cable, and the company did not send me their $5 IO board, which would have made things easier. Learning curve may be a little sharper than needed as I’ve not found the Windows software to be very user-friendly, and documentation could be improved too.
I’ll give the display with enclosure, micro USB power board, and UART cable as shown on the first photo.
To enter the draw simply leave a comment below. Other rules are as follows:
- Only one entry per contest. I will filter out entries with the same IP and/or email address.
- Contests are open for 48 hours starting at 10am (Bangkok time) every day. Comments will be closed after 48 hours.
- Winners will be selected with random.org, and announced in the comments section of each giveaway.
- I’ll contact the winner by email, and I’ll expect an answer within 24 hours, or I’ll pick another winner.
- Shipping
- $15 for registered airmail small packet for oversea shipping payable via Paypal within 48 hours once the contest (for a given product) is complete.
- If Paypal is not available in your country, you can still play, and I’ll cover the cost of sending the parcel by Sea and Land (SAL) without registration if you win.
- I’ll post all 10 prizes at the same time, around the 8th of November
- I’ll make sure we have 10 different winners, so if you have already won a device during this giveaway week, I’ll draw another person.
If you don’t end up being the winner, but are still interested in the solution, Nextion Enhanced 7″ display can be purchased for $88 with resistive touch and $108 with capacitive touch.
Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.
Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress
Let’s see is luck is on my side 🙂
Wow, this will be Perfect to change the resistive screen with a capacitive one for my internet radio project
https://www.youtube.com/watch?v=ekWf2dr7sis
BTW, I make my code public, instead all other who want money for they work…
Perfect for my BBBlue
It looks interesting.
I have read the mini review,looking forward. & “CNXSoft was here!” I DONT know but somehow i always find these funny and humorous.
Count me in!
This one is really a great giveaway. Would be perfect for my home automation control board
Nice, i’m in 🙂
Sweet! ??
week
Pick me 🙂
I’m in.
Try try try again
Screen
Thanks!
Great giveaways, I’m in.
count me in
Can have
count me too
Thanks for the invite
I’m in!
yay, mooooree
I”m in
.
Great LCD.
Count me in, please!
I’m in
Nice screen. I’m in.
I’m in, thanks! 🙂
I want this one!
I need an LCD!
That would be awesome!
+1
i win :0
Count me in 🙂
i want it!
I want It.
I want it. Thank you
I oddly enough like Nextion HMIs (because of the MS Windows only software and very closed format of the files generated for the displays)… for small screens, beware of the chinese versions (the software forked a couple of years ago and is unusable)
I have a handful, including two revamped one for small projects and I will certainly get some more at one point.
That said, count me in for the giveaway !
Let’s roll the dice!
Me tooooo….. 🙂
I’d like it please
I am in. Great giveaway !!
please count me in
Would be a perfect addition to my smart home setup.
looks nice 😀
Hi.
I am leaving a comment below 😉
Thank you and have a nice day.
count me too
count me in
+me too
Please ?
Amazing!
My sdr project is ready.
I’m in
Would be great for my homeautomation 🙂
Good luck to you all!
need a display
Good luck everyone!
Maybe me? 🙂
heh, windows only tool… :}
This would be really useful!
great display panel. would like to get this.
I’m in
May the luck will be with me… this time.
Hello. Thank you
I’m in!
Here is my luck!
I’m in!
I want to win
I’m in!
I’m also interested!
I’m in!
thanks!
I’m in
Cool!
+1
can be useful
Nice.
Would be cool 🙂
Count me in! Good luck.
Nice display for a microcontroller
It would be great to win…
All hardware reviews show hard, time consuming work and insight. Thx
One would be great for my upcoming esp8266 weather station project
Let’s try again 🙂
It would make a nice Magic mirror base for my project.
I’m In!
mee, toooooo
Nice thing. Thanks for sharing.
wohoo, i’m in 🙂
I’m in, really cool device!
Awesome, that would fit in with my headless iot device , could you add my name?
add me
Me to
Hoping….
Interesting. Fingers crossed!
I want it
Thanks!
count me in
I’m in!
Oh, this is the kind of display I was looking for my next project.
Thanks
Could be quite interesting to put to use.
It’s my turn.
Got a few projects lined up this would be perfect for!
This would have to be a pretty impressive display to be worth $100, but I would pay $15 for shipping just to find out.
This looks cool, hope I win
Good luck!
i’m in !!!
Eric
Count me
Count me too
Thanks
+1
Count me in. Thanks!
My reply is the worst
I am in. Will be perfect for my Smart Home project.
Count me in!
I’m in
+1
хорошая панель
me
Thanks!
Count me in
Yes pls.
My hands are itching to try this out!
Nice one 🙂
Perfect gift ! Count me in.
Me to!
I’m in!
Welcome !
thanks
Let’s play!
Yes thanks I need one!
+1
I’m in!
Count me in for this one
Looks cool
Count me in!
Great
Wish me luck
I’m in.
Thanks 😉
Thanks
I’m in
Count me in.
Thanks.
I’m in!
145 Entries, and the winner is Ved Vernekar (#31).